...
    "doSupport": false,
...

support is disabled here

ABS
no nozzle fan
no raft with support
.2 mm layer height
and the bearings keep coming off the support while printing.

Here is my custom profile
can you tell me what I am setting wrong
{
    "comment" : [
      "This is a profile for printing ABS on the right extruder with dissolvable",
      "support and raft on the left","PURPLE"
    ],
    "version":"3.0.0",

    "layerHeight": 0.20,
    "layerWidthMaximum": 0.4,
    "layerWidthMinimum": 0.4,
    "layerWidthRatio": 1.48148,
    "bedZOffset": 0.0,
    "startX": -110.4,
    "startY": -74.0,
    "startZ": 0.2,
    "defaultExtruder": 0,

    "rapidMoveFeedRateXY": 150,
    "rapidMoveFeedRateZ": 23,

    "minLayerDuration": 5.0,
    "minSpeedMultiplier": 0.3,

    "doDynamicSpeed": false,
    "dynamicSpeedCurvatureThreshold": 15,
    "dynamicSpeedDetectionWindow": 3.0,
    "dynamicSpeedSlowdownRatio": 0.5,
    "doDynamicSpeedGradually": true,
    "dynamicSpeedTransitionWindow": 6.0,
    "dynamicSpeedTransitionShape": 0.4,
    "doDynamicSpeedOutermostShell" : true,
    "doDynamicSpeedInteriorShells" : false,

    "doSplitLongMoves": true,
    "splitMinimumDistance": 0.4,

    "extruderTemp0": 230,
    "extruderTemp1": 250,
    "platformTemp": 110,

    "numberOfShells": 2,
    "shellsLeakyConnections": false,
    "infillShellSpacingMultiplier": 0.7,
    "insetDistanceMultiplier": 1.0,

    "roofThickness": 0.8,
    "roofLayerCount_disabled": 4,
    "roofAnchorMargin": 0.4,
    "floorThickness": 0.8,
    "floorLayerCount_disabled": 4,

    "coarseness": 0.0001,

    "sparseInfillPattern": "hexagonal",
    "infillDensity": 0.1,
    "infillOrientationOffset": 0,
    "infillOrientationInterval": 90,
    "infillOrientationRange": 90,

    "gridSpacingMultiplier": 1.0,
    "solidFillOrientationOffset" : -45,
    "solidFillOrientationInterval": 90,
    "solidFillOrientationRange": 90,

    "doBacklashCompensation": false,
    "backlashEpsilon": 0.05,
    "backlashFeedback": 0.9,
    "backlashX": 0.0,
    "backlashY": 0.09,

    "doBridging": true,
    "bridgeAnchorMinimumLength": 0.8,
    "bridgeAnchorWidth": 0.8,
    "bridgeMaximumLength": 80.0,
    "bridgeSpacingMultiplier": 1.0,

    "doExternalSpurs": true,
    "doInternalSpurs": false,
    "maxSpurWidth": 0.5,
    "minSpurLength": 0.34,
    "minSpurWidth": 0.12,
    "spurOverlap": 0.001,

    "doRaft": false,
    "defaultRaftMaterial": 1,
    "doMixedRaft": true,
    "raftAligned": false,
    "raftBaseAngle": 0,
    "raftBaseDensity": 0.7,
    "raftBaseLayers": 1,
    "raftBaseRunGapRatio": 0.8,
    "raftBaseRunLength": 15.0,
    "raftBaseThickness": 0.3,
    "raftBaseWidth": 2.5,
    "raftInterfaceAngle": 45,
    "raftInterfaceDensity": 0.3,
    "raftInterfaceLayers": 1,
    "raftInterfaceThickness": 0.27,
    "raftInterfaceWidth": 0.4,
    "raftModelSpacing": 0,
    "raftOutset": 4,
    "raftSurfaceAngle": 0,
    "raftSurfaceLayers": 2,
    "raftSurfaceThickness": 0.20,

    "doPurgeWall": true,
    "purgeWallModelOffset" : 2.0,
    "purgeWallSpacing" : 1.0,
    "purgeWallWidth" : 0.5,
    "purgeWallBasePatternWidth" : 8.0,
    "purgeWallBaseFilamentWidth" : 2.0,
    "purgeWallBasePatternLength" : 10.0,
    "purgeWallPatternWidth" :  2.0,
    "purgeBucketSide" :  4.0,
    "purgeWallXLength" : 30,

    "anchorWidth": 2.0,
    "anchorExtrusionAmount": 5.0,
    "anchorExtrusionSpeed": 2.0,

    "doSupport": false,
    "defaultSupportMaterial": 1,
    "doMixedSupport": false,
    "doSupportUnderBridges": false,
    "supportAligned": false,
    "supportLeakyConnections": false,
    "supportDensity": 0.35,
    "supportExtraDistance": 1.5,
    "supportAngle": 10.0,
    "supportModelSpacing": 0.15,
    "supportExcessive": false,

    "doFanCommand": false,
    "fanLayer": 1,
    "weightedFanCommand": -1,
    "doFanModulation": false,
    "fanModulationWindow": 0.1,
    "fanModulationThreshold": 0.5,

    "doPrintProgress": true,

    "startGcode": "",
    "endGcode": "",

    "commentClose": "",
    "commentOpen": ";",

    "extruderProfiles": [
        {
            "bridgesExtrusionProfile": "bridges",
            "feedDiameter": 1.71,
            "feedstockMultiplier": 0.93,
            "firstLayerExtrusionProfile": "firstlayer",
            "firstLayerRaftExtrusionProfile": "firstlayerraft",
            "infillsExtrusionProfile": "infill",
            "insetsExtrusionProfile": "insets",
            "nozzleDiameter": 0.4,
            "outlinesExtrusionProfile": "outlines",
            "raftBaseExtrusionProfile": "raftbase",
            "restartExtraDistance": 0.0,
            "retractDistance": 1.3,
            "retractRate": 25,
            "toolchangeRetractDistance" : 19.0,
            "toolchangeRetractRate" : 6.0,
            "toolchangeRestartDistance" : 18.5,
            "toolchangeRestartRate" : 6.0
        },
        {
            "bridgesExtrusionProfile": "bridges",
            "feedDiameter": 1.73,
            "feedstockMultiplier": 0.93,
            "firstLayerExtrusionProfile": "firstlayer",
            "firstLayerRaftExtrusionProfile": "firstlayerraft",
            "infillsExtrusionProfile": "infill",
            "insetsExtrusionProfile": "insets",
            "nozzleDiameter": 0.4,
            "outlinesExtrusionProfile": "outlines",
            "raftBaseExtrusionProfile": "raftbase",
            "restartExtraDistance": 0.0,
            "retractDistance": 1.3,
            "retractRate": 25,
            "toolchangeRetractDistance" : 19.0,
            "toolchangeRetractRate" : 6.0,
            "toolchangeRestartDistance" : 18.5,
            "toolchangeRestartRate" : 6.0
        }
    ],
    "extrusionProfiles": {
        "bridges": {
            "feedrate": 40,
            "temperature_disabled": 230.0
        },
        "firstlayer": {
            "feedrate": 30,
            "temperature_disabled": 230.0
        },
        "firstlayerraft": {
            "feedrate": 50,
            "temperature_disabled": 230.0
        },
        "infill": {
            "feedrate": 90,
            "temperature_disabled": 230.0
        },
        "insets": {
            "feedrate": 90,
            "temperature_disabled": 230.0
        },
        "outlines": {
            "feedrate": 40,
            "temperature_disabled": 230.0
        },
        "raftbase": {
            "feedrate": 10,
            "temperature_disabled": 230.0
        }
    }
}