<![CDATA[SoliForum - 3D Printing Community — Extruder Gear Stripping Filament]]> 2015-02-07T19:20:26Z PunBB https://www.soliforum.com/topic/9768/extruder-gear-stripping-filament/ <![CDATA[Re: Extruder Gear Stripping Filament]]> yeah unfortunately its also happening in the load filament screen so there is not any sort of pressure on the nozzle

]]> https://www.soliforum.com/user/8837/ 2015-02-07T19:20:26Z https://www.soliforum.com/post/83921/#p83921 <![CDATA[Re: Extruder Gear Stripping Filament]]> Your print head could be too close to the bed. Try lowering the bed just a bit. If it is too close it will cause back pressure which stop it from extruding and make the gears just dig into the feed.

]]> https://www.soliforum.com/user/7731/ 2015-02-07T18:38:02Z https://www.soliforum.com/post/83911/#p83911 <![CDATA[Extruder Gear Stripping Filament]]> been having a major problem recently with my printer every time i try to load filament i load it in it starts feeding works for a while then just stops extruding now i know my temperature is fine and i have replaced the dodgy connector that powers the heat element all i can think of maybe the spring that holds the filament loader thing has come loose or something and its not getting a good grip on the filament causing it to strip it / smooth it down i have also taken everything apart and cleaned thoroughly so i do not think that is the problem.

any help would be much appreciated thanks guys

]]> https://www.soliforum.com/user/8837/ 2015-02-07T17:26:35Z https://www.soliforum.com/post/83893/#p83893