<![CDATA[SoliForum - 3D Printing Community — New Da Vinci V1 gives 0040 error on first demo print - what now?]]> 2015-01-24T18:32:52Z PunBB https://www.soliforum.com/topic/9458/new-da-vinci-v1-gives-0040-error-on-first-demo-print-what-now/ <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> owenransen wrote:

Before trying my own STL files I thought I'd get it to do a demo. It stopped and gave me a 0040 (cannot read\write SD card) error.

So here is the solution in pictures, see three attached images. Or maybe even easier see this blog http://owenransen.blogspot.it/2015/01/3 … ne-eh.html:

]]> https://www.soliforum.com/user/299/ 2015-01-24T18:32:52Z https://www.soliforum.com/post/81331/#p81331 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> loncaric wrote:

Also, it says they'll respond within three days but they've never taken more than an hour to email me back.

If you need to exchange parts, that's another story.  That takes a while.

Yes, then replied within a few hours.

]]> https://www.soliforum.com/user/299/ 2015-01-24T18:28:49Z https://www.soliforum.com/post/81328/#p81328 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> Also, it says they'll respond within three days but they've never taken more than an hour to email me back.

If you need to exchange parts, that's another story.  That takes a while.

]]> https://www.soliforum.com/user/8816/ 2015-01-24T16:51:13Z https://www.soliforum.com/post/81300/#p81300 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> carl_m1968 wrote:

As I posted to your post in the other thread, see this thread.

The issue is the SD card. It is not plugged, fully seated, or worse faulty.

Yes, it felt a bit loose. I've taken it out and pushed it back in again. Now I'll try the demo again...

]]> https://www.soliforum.com/user/299/ 2015-01-24T10:46:02Z https://www.soliforum.com/post/81272/#p81272 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> rockosmodlife wrote:

Literally switch off and on the main switch on the back.

Thanks, I was not sure if that would damage something.

I'll try the demo again now, after reseating the SDA card...

]]> https://www.soliforum.com/user/299/ 2015-01-24T10:44:57Z https://www.soliforum.com/post/81271/#p81271 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> As I posted to your post in the other thread, see this thread.

http://www.soliforum.com/topic/8473/err … -vinci-10/

The issue is the SD card. It is not plugged, fully seated, or worse faulty.

]]> https://www.soliforum.com/user/7731/ 2015-01-24T09:19:22Z https://www.soliforum.com/post/81266/#p81266 <![CDATA[Re: New Da Vinci V1 gives 0040 error on first demo print - what now?]]> Literally switch off and on the main switch on the back.

]]> https://www.soliforum.com/user/8334/ 2015-01-24T09:18:43Z https://www.soliforum.com/post/81265/#p81265 <![CDATA[New Da Vinci V1 gives 0040 error on first demo print - what now?]]> Before trying my own STL files I thought I'd get it to do a demo. It stopped and gave me a 0040 (cannot read\write SD card) error. XYZprinting said they'll reply to my support request within 3 days. 3 days!

Anyone know about this error?

And anyone know how I should reset the machine... It os flashing and beeping in the middle of a stopped print. How do I switch it off safely?

]]> https://www.soliforum.com/user/299/ 2015-01-24T08:55:58Z https://www.soliforum.com/post/81258/#p81258