<![CDATA[SoliForum - 3D Printing Community — what is the best temp to set for your heated Platform]]>2015-01-20T22:16:17ZPunBBhttps://www.soliforum.com/topic/9313/what-is-the-best-temp-to-set-for-your-heated-platform/<![CDATA[Re: what is the best temp to set for your heated Platform]]>i like running my abs on 70 c with a glass bed. for PLA i just drop it to 50 C or less at times]]>https://www.soliforum.com/user/7171/2015-01-20T22:16:17Zhttps://www.soliforum.com/post/80563/#p80563<![CDATA[Re: what is the best temp to set for your heated Platform]]>I have to run mine at 80 for ABS to keep it stuck without warping]]>https://www.soliforum.com/user/795/2015-01-20T01:33:28Zhttps://www.soliforum.com/post/80322/#p80322<![CDATA[Re: what is the best temp to set for your heated Platform]]>n2ri wrote:
printers may very depending on many things like sensor accuracy etc
Which is a good point for everyone. I do 100 for ABS and 50 for PLA but my setting doen't always work for my son who has the exact same printer.
]]>https://www.soliforum.com/user/1802/2015-01-19T00:57:27Zhttps://www.soliforum.com/post/80053/#p80053<![CDATA[Re: what is the best temp to set for your heated Platform]]>If using a glue stick, I lay down a liberal coat on the surface then wipe with a damp paper towel to coat evenly and remove uneven areas.]]>https://www.soliforum.com/user/9075/2015-01-19T00:45:23Zhttps://www.soliforum.com/post/80048/#p80048<![CDATA[Re: what is the best temp to set for your heated Platform]]>i turned mine down for 215 to 205 and the eat plat for 100 to 90 and i found that Elmer's Craft Bond Extra Strength works good I went to walmart and got like 10 diff glue sticks to test]]>https://www.soliforum.com/user/8901/2015-01-18T23:31:38Zhttps://www.soliforum.com/post/80031/#p80031<![CDATA[Re: what is the best temp to set for your heated Platform]]>I made a polycarbonate case for my sd2 and I usually set the bed to 80-90 C for ABS and around 50-60 for PLA. I also use UHU stic which is a glue stick that users on other forums touted and has worked extremely well for me. You should also level the z when the bed is up to temp because the offset will change slightly.]]>https://www.soliforum.com/user/9075/2015-01-18T21:41:22Zhttps://www.soliforum.com/post/79996/#p79996<![CDATA[Re: what is the best temp to set for your heated Platform]]>printers may very depending on many things like sensor accuracy etc]]>https://www.soliforum.com/user/795/2015-01-18T21:06:23Zhttps://www.soliforum.com/post/79988/#p79988<![CDATA[Re: what is the best temp to set for your heated Platform]]>For ABS 105-110 For PLA 60]]>https://www.soliforum.com/user/2291/2015-01-18T18:34:47Zhttps://www.soliforum.com/post/79954/#p79954<![CDATA[what is the best temp to set for your heated Platform]]>what is the best temp to set for your Heated Aluminum Build Platform with Glass Bed 100? or less and what glue are all using ?]]>https://www.soliforum.com/user/8901/2015-01-18T18:22:54Zhttps://www.soliforum.com/post/79953/#p79953