<![CDATA[SoliForum - 3D Printing Community — Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> 2016-01-30T16:29:33Z PunBB https://www.soliforum.com/topic/9170/images-for-reference-true-1mm-layers-not-on-a-da-vinci/ <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> http://i700.photobucket.com/albums/ww10/deusex-1/things.jpg

The face is 5 inches long and the Pred is 7 inches long.
Done on my Duo 2.0A using simplify3D on medium settings.

]]> https://www.soliforum.com/user/10765/ 2016-01-30T16:29:33Z https://www.soliforum.com/post/115355/#p115355 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Yes, all you need is there :
http://www.lesimprimantes3d.fr/forum/to … ment-21710

You have to use XYZware advanced mode.
Slice with slicer 3 with bundle config file, export the gcode. open gcode file with notepad and copy from the line 17 at the end.

in XYZware adv, import fichier "entete XYZware.3w" and paste the gcode at the line 39. and print.

]]> https://www.soliforum.com/user/13139/ 2016-01-30T14:10:51Z https://www.soliforum.com/post/115348/#p115348 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> sangha2006 wrote:

Da vinci junior mod at 0.05

Can the junior even do 0.05mm ??

]]> https://www.soliforum.com/user/6872/ 2016-01-30T10:02:26Z https://www.soliforum.com/post/115343/#p115343 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> http://soliforum.com/i/?XcsHxk2.jpg

Da vinci junior mod at 0.05

]]> https://www.soliforum.com/user/13139/ 2016-01-30T09:35:33Z https://www.soliforum.com/post/115342/#p115342 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Not from a davinci but I wanted to try it too
http://soliforum.com/i/?bRseTZ5.jpg
http://soliforum.com/i/?g5y8Zd9.jpg

]]> https://www.soliforum.com/user/6797/ 2016-01-27T12:10:24Z https://www.soliforum.com/post/115145/#p115145 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> It's difficult to compare Timberfill with regular PLA given that it's wood-based.
I prefer it to Woodfill though, much easier to print and sticks to the bed great.

]]> https://www.soliforum.com/user/6872/ 2016-01-25T19:10:57Z https://www.soliforum.com/post/115019/#p115019 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> scobo wrote:

Well, if we're comparing results with non-stock setups, here's mine with the E3D (direct drive).
0.1mm using Timberfill, the large one is 80mm in height, the small one 40mm.

http://i882.photobucket.com/albums/ac28/scobodon/c9db1074474208e75b855854bf9193e1_zpsrlbejzpz.jpg

Wow looks great. But the premium filament dosent make a big differnce.

]]> https://www.soliforum.com/user/11652/ 2016-01-25T18:55:30Z https://www.soliforum.com/post/115018/#p115018 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Well, if we're comparing results with non-stock setups, here's mine with the E3D (direct drive).
0.1mm using Timberfill, the large one is 80mm in height, the small one 40mm.

http://i882.photobucket.com/albums/ac28/scobodon/22dab7108406a3e3e0bc0951f380c4ae_zpsjckww76d.jpg

]]> https://www.soliforum.com/user/6872/ 2016-01-25T18:37:49Z https://www.soliforum.com/post/115015/#p115015 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> .1 layer height cheap PLA filament from eBay layer fan Da Vinci 1.0a Blue E3D Bowden custom X Carriage

]]> https://www.soliforum.com/user/11652/ 2016-01-25T17:58:52Z https://www.soliforum.com/post/115014/#p115014 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> social wrote:

Guys I'm having hellish problems with my Da Vinci 1.0 with regards to the accuracy of the height things come out at.
I've just printed a cube 9mm square and although it's 9mm in the x and y plane it prints only 8mm high! this is at 0.2mm layer height. Basically everything I print comes out not the correct height. Any ideas?

Your steps per mm on the Z axis are not correct. Unfortunate for you on an XYZ printer if you are running stock firmware this can not be accessed or changed.. Your only other possibility is your initial layer is way too squished.. But then that would mean the first 5 layers are all squished based on a .2mm layer height to loose 1mm.

]]> https://www.soliforum.com/user/7731/ 2016-01-25T16:19:13Z https://www.soliforum.com/post/115012/#p115012 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Guys I'm having hellish problems with my Da Vinci 1.0 with regards to the accuracy of the height things come out at.
I've just printed a cube 9mm square and although it's 9mm in the x and y plane it prints only 8mm high! this is at 0.2mm layer height. Basically everything I print comes out not the correct height. Any ideas?

]]> https://www.soliforum.com/user/13312/ 2016-01-25T13:41:36Z https://www.soliforum.com/post/115006/#p115006 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Just print one of these http://www.thingiverse.com/thing:529837 and attach a 40mm fan.
I power mine from it's own 12v supply. Dead easy !

]]> https://www.soliforum.com/user/6872/ 2015-01-26T17:27:13Z https://www.soliforum.com/post/81657/#p81657 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Scobo;  The fan one looks great.  Is there a writeup to the fan setup you are running?

]]> https://www.soliforum.com/user/9229/ 2015-01-26T16:52:32Z https://www.soliforum.com/post/81653/#p81653 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> madmike8 wrote:

Scobo, that "fan on" owl looks pretty darn good to me.

Cheers. Not much wrong with yours either.
It didn't occur to me to try the fan at first but it certainly made a difference with this model.
I find it's the only way to get clean prints with tall, thin parts too. Even at thicker layer heights.

]]> https://www.soliforum.com/user/6872/ 2015-01-17T22:16:30Z https://www.soliforum.com/post/79804/#p79804 <![CDATA[Re: Images for Reference, True .1mm Layers. (Not on a Da Vinci)]]> Scobo, that "fan on" owl looks pretty darn good to me.

]]> https://www.soliforum.com/user/8724/ 2015-01-17T22:08:02Z https://www.soliforum.com/post/79801/#p79801