<![CDATA[SoliForum - 3D Printing Community — Flashed then flashed againn to nothing]]> 2015-01-13T20:00:19Z PunBB https://www.soliforum.com/topic/9166/flashed-then-flashed-againn-to-nothing/ <![CDATA[Re: Flashed then flashed againn to nothing]]> wgpedley wrote:

Well here it is: Bought brand new about 1 month and worked fine untill we decided to flash to get Repieter stuff to work.


Long story short, i think we flashed it all the way back cause the pc port won't even come up and it only has 2 bars and no light or nothing. Support guys don't care. So can somebody tell me if there is a motherboard we can use in a replacement?

If you have 2 black bars and no internal light that is a strong indicator that you have a blank machine with no firmware on it. You need to download the Arduino 1.5.8 IDE from the Arduino website in order to communicate with the printer to upload the repetier .bin file (firmware)

]]> https://www.soliforum.com/user/8334/ 2015-01-13T20:00:19Z https://www.soliforum.com/post/78794/#p78794 <![CDATA[Re: Flashed then flashed againn to nothing]]> Have you tried shorting the jumper again to erase the unit and put it back in programming mode?  In theory the processor on this board should never be able to be bricked.  It with either be in Arduino Due mode if firmware is on it,  or it will be in Bocca mode if blanked using jumper.

]]> https://www.soliforum.com/user/7731/ 2015-01-13T04:56:34Z https://www.soliforum.com/post/78715/#p78715 <![CDATA[Flashed then flashed againn to nothing]]> Well here it is: Bought brand new about 1 month and worked fine untill we decided to flash to get Repieter stuff to work.


Long story short, i think we flashed it all the way back cause the pc port won't even come up and it only has 2 bars and no light or nothing. Support guys don't care. So can somebody tell me if there is a motherboard we can use in a replacement?

]]> https://www.soliforum.com/user/8788/ 2015-01-13T04:21:32Z https://www.soliforum.com/post/78708/#p78708