<![CDATA[SoliForum - 3D Printing Community — Noob awaiting an SD4]]> 2015-02-02T08:42:47Z PunBB https://www.soliforum.com/topic/8992/noob-awaiting-an-sd4/ <![CDATA[Re: Noob awaiting an SD4]]> It screws in no problem with fromt screws and I ziptied motor so back had support and have been having great prints. Works ansolutely fine for me. I was unaware there was ppl w issues...is there othere options fellas!? For me im alright, but if theres one specificslly for it, jm happy tonuse it

]]> https://www.soliforum.com/user/8772/ 2015-02-02T08:42:47Z https://www.soliforum.com/post/82851/#p82851 <![CDATA[Re: Noob awaiting an SD4]]> I'm a little confused. I've read that Lawsy's MK5 doesn't fit the E3D v6 right. Is that true?

What is the best solution for an SD4 with an E3D v6? I'd rather use the standard setup, I don't have the tools or machinery to, for example, turn down the top portion.

If I do need to print a new extruder, what is the best material? And what do you think of using a service that prints in resin so that it will be much more accurate fit wise?

]]> https://www.soliforum.com/user/8575/ 2015-02-02T07:16:23Z https://www.soliforum.com/post/82847/#p82847 <![CDATA[Re: Noob awaiting an SD4]]> it's an ongoing struggle tongue one fix at a time. someday i won't have a loose everything

]]> https://www.soliforum.com/user/7321/ 2015-01-06T03:58:19Z https://www.soliforum.com/post/77658/#p77658 <![CDATA[Re: Noob awaiting an SD4]]> jagowilson wrote:

the heatsink fan is the only one required, it's the small 30mm fan. anything else is optional.

by the way I recently printed and started using this mount. The locking ring removed a little bit of slop I had in my hotend. Unfortunately my printer isn't accurate enough for wardjr's mount. I recommend this one if you have any doubts about the accuracy of your printer when you set it up.

http://www.thingiverse.com/thing:431363

Hmmm, maybe it's time you dial that thing in wink

]]> https://www.soliforum.com/user/2291/ 2015-01-06T03:56:45Z https://www.soliforum.com/post/77656/#p77656 <![CDATA[Re: Noob awaiting an SD4]]> Oh I plan on spending hours before I can print...at least it will be here. Headaches and all

]]> https://www.soliforum.com/user/8772/ 2015-01-06T03:48:53Z https://www.soliforum.com/post/77655/#p77655 <![CDATA[Re: Noob awaiting an SD4]]> I remember getting mine and then not being able to print for a week because I couldn't figure out the belt tensioners or how to make the bed home right wink that was stir crazy

]]> https://www.soliforum.com/user/7321/ 2015-01-06T03:46:02Z https://www.soliforum.com/post/77654/#p77654 <![CDATA[Re: Noob awaiting an SD4]]> Thanks Jag, yeah already snagged those files along with others...I have parts...files...no printer. Going stir crazy

]]> https://www.soliforum.com/user/8772/ 2015-01-06T03:42:38Z https://www.soliforum.com/post/77653/#p77653 <![CDATA[Re: Noob awaiting an SD4]]> the heatsink fan is the only one required, it's the small 30mm fan. anything else is optional.

by the way I recently printed and started using this mount. The locking ring removed a little bit of slop I had in my hotend. Unfortunately my printer isn't accurate enough for wardjr's mount. I recommend this one if you have any doubts about the accuracy of your printer when you set it up.

http://www.thingiverse.com/thing:431363

]]> https://www.soliforum.com/user/7321/ 2015-01-06T03:39:14Z https://www.soliforum.com/post/77652/#p77652 <![CDATA[Re: Noob awaiting an SD4]]> Let me hop back in with my dumbness...what fans should and shouldnt I have on my e3d...and I will be printing mainly ABS but occasionaly PLA...also want to take a stab at flex filament and acetal (even with its insane difficulty and hazards...thats more a project type deal so ABS, PLA, maybe flex once and a blue moon) thank you sirs. You are all scholars and gentlemen.

Mike

]]> https://www.soliforum.com/user/8772/ 2015-01-06T03:27:48Z https://www.soliforum.com/post/77650/#p77650 <![CDATA[Re: Noob awaiting an SD4]]> Especially with an e3d you don't need that fan. The heatsink should be borderline room temp with the it has fan on it. Mine is cool enough to grab with my bare hands even after several hours of printing.

]]> https://www.soliforum.com/user/7321/ 2015-01-06T03:14:32Z https://www.soliforum.com/post/77645/#p77645 <![CDATA[Re: Noob awaiting an SD4]]> jagowilson wrote:

On the lawsy carriage it does reduce travel a bit but the trick is to just rotate the fan 90 degrees... If you're worried about travel the side fan takes away more. I removed it and have no issues. Prior SD models use the stock hotend without the fan just fine so what is the purpose?

If anything I'm more interested in knowing how you made the e3d fit in the stock aluminum. I have my block somewhere. Isn't the e3d too big, even if you drill out the holes? Did you grind the heat sink?

All I did was chuck the E3D aluminum heatsink into the lathe and removed the top flange.  It then fit perfectly into the hole where the stock extruder went and the set screw holds it there.

The new fan actually misses the Y carriage (slides underneath).  The 6mm travel reduction is from the frame of the upper fan grill hitting.  Interesting comment about removing the side fan.  I think removing it all-together will buy you 10mm more travel over stock.

]]> https://www.soliforum.com/user/6045/ 2015-01-06T03:07:00Z https://www.soliforum.com/post/77643/#p77643 <![CDATA[Re: Noob awaiting an SD4]]> oh, yeah

]]> https://www.soliforum.com/user/8017/ 2015-01-05T23:47:35Z https://www.soliforum.com/post/77614/#p77614 <![CDATA[Re: Noob awaiting an SD4]]> The aluminum plate attaches to the motor via 50mm bolts on the fan and the plate covers the back, left and bottom of the motor. The bottom makes the motor stand too high and you can't align the holes on the motor, center carriage and mk5. All of this really only matters with the linear bearings conversion. I'm just saying I think it's fine to take that fan off. You have to keep the aluminum to use the stock carriage anyway because it bolts the motor to the center carriage through 3 holes in the bottom of the plate, and the motor doesn't have those holes.

]]> https://www.soliforum.com/user/7321/ 2015-01-05T23:34:20Z https://www.soliforum.com/post/77611/#p77611 <![CDATA[Re: Noob awaiting an SD4]]> Sorry, what do you mean by too tall?

]]> https://www.soliforum.com/user/8017/ 2015-01-05T23:22:24Z https://www.soliforum.com/post/77607/#p77607 <![CDATA[Re: Noob awaiting an SD4]]> You have to for the center carriage mount lawsy designed, the motor is too tall otherwise.

]]> https://www.soliforum.com/user/7321/ 2015-01-05T23:20:23Z https://www.soliforum.com/post/77606/#p77606