SoliForum - 3D Printing Community — Firmware 1.1J / Which Software?

Re: Firmware 1.1J / Which Software?

2014-12-27T04:06:35Z

Thanks for the info about the auto-upgrade. I didn't know about that.

Re: Firmware 1.1J / Which Software?

2014-12-27T03:09:48Z

stevendom57 wrote:

I just got a Da Vinci 1.0 and of course immediately upgraded to firmware 1.2.3. I now plan on downgrading to 1.1J. What is the recommend XYZ.exe software to use with this firmware? Can I use 1.1.33.3?
Steven

You can use 1.1.33 but you *must* block xyz.exe with the windows firewall or littlesnitch on a mac (google "how to block exe with windows" etc).

if you're on 1.2.3 it may work, but I strongly suggest that you downgrade back to 1.1.J using the DAVINCI_1_0_RESET.zip file in the http://wctek.com/shop download area.

make sure you block the xyz.exe (XYZWare) before you do anything or it will re-upgrade to 1.2.3 in the background without asking you (pretty lame).

Good Luck,
F3

Re: Firmware 1.1J / Which Software?

2014-12-24T00:01:35Z

You can really use any as long as you plan on blocking xyz from connecting to the internet.

I'm using the version that came with my printer, simply because I don't want to upgrade.

Re: Firmware 1.1J / Which Software?

2014-12-23T20:24:40Z

If you're not going to reset cartridges then whatever is the most current, I imagine.

Firmware 1.1J / Which Software?

2014-12-21T15:20:52Z

I just got a Da Vinci 1.0 and of course immediately upgraded to firmware 1.2.3. I now plan on downgrading to 1.1J. What is the recommend XYZ.exe software to use with this firmware? Can I use 1.1.33.3?

Steven