<![CDATA[SoliForum - 3D Printing Community — Print stops halfway]]>2014-11-23T14:18:29ZPunBBhttps://www.soliforum.com/topic/8431/print-stops-halfway/<![CDATA[Re: Print stops halfway]]>Same is true for the heat bed thermistor...check all those connections as well from the thermistor leads all the way back to the controller board.]]>https://www.soliforum.com/user/131/2014-11-23T14:18:29Zhttps://www.soliforum.com/post/72790/#p72790<![CDATA[Re: Print stops halfway]]>Hi, I checked every connection, everything is fine, I used another USB cable, USB PC port and even used another PC, nothing works]]>https://www.soliforum.com/user/4542/2014-11-23T05:52:31Zhttps://www.soliforum.com/post/72771/#p72771<![CDATA[Re: Print stops halfway]]>IronMan wrote:
Check your hot end thermistor wiring...check for shorts / loose connections. Also, make sure the wiring is secured properly and does not flex with movement of the carriage.
Yep
]]>https://www.soliforum.com/user/2291/2014-11-22T14:34:53Zhttps://www.soliforum.com/post/72695/#p72695<![CDATA[Re: Print stops halfway]]>Check your hot end thermistor wiring...check for shorts / loose connections. Also, make sure the wiring is secured properly and does not flex with movement of the carriage.]]>https://www.soliforum.com/user/131/2014-11-22T11:45:44Zhttps://www.soliforum.com/post/72682/#p72682<![CDATA[Print stops halfway]]>Hi , I am recently experiencing this problem where my printer stops during the print. The extruder remain at the place where it stopped and the logs on the Repetier host shows: 18:06:46.496 : Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting). By the way, I also tried using Cura and it has the same problem. Please help. Thank you.]]>https://www.soliforum.com/user/4542/2014-11-22T10:16:36Zhttps://www.soliforum.com/post/72679/#p72679