Also, if the person claiming to have air bubbles, kinking, and stretching could PM or email me, I'd be happy to help out. I've never heard of someone experiencing all three - very odd. Anyway, if you see this give me a shout so I can get things up and running for you!

Filastruder
docs.google.com/document/d/1KDRhj3wiBRp211np723yzRO1xaX64qujUFnLHhC4Es4/edit?usp=sharing

Filabot
docs.google.com/document/d/1lB4zvon0Z9fqC_NAxL4ZUFp2IIjirYbgLY_OKsDiRPs/edit?usp=sharing

As for the title, I was trying to avoid scaring people away with the word survey. In hindsight, I probably should have made it something more like "Filastruder vs Filabot". It might have been more intriguing. You live you learn.

The main thing is that I mentioned this as a method to gather information in the proposal memo I wrote at the start of the class. Now I've got to follow up on it or come up with a convincing reason not to. If this doesn't pan out I can at least show that I've made the attempt. It would've been more satisfying to get something worthwhile out of it though.

You also made this topic with a pretty non-descriptive subject and posted in general discussion, so it's unlikely for people to find it.

I'm not sure it'll be much use to anyone though. I've only gotten two results so far and they're both for the Filastruder.

Ohio Joe wrote:

I hadn't planned on making the results public. However, if there were enough people who wanted to see it, I suppose I could. They're pretty anonymous and I don't think it would be a problem if I did.

Why not?

Its pretty commonly accepted on 3D printing forums that results should be shared in order to give back to the community for taking up their time. What's the harm in it? There's certainly no identifying information..?

+1

I hadn't planned on making the results public. However, if there were enough people who wanted to see it, I suppose I could. They're pretty anonymous and I don't think it would be a problem if I did.

Why not?

Its pretty commonly accepted on 3D printing forums that results should be shared in order to give back to the community for taking up their time. What's the harm in it? There's certainly no identifying information..?

Unfortunately, when I say my sources are limited, I mean to say that sources that would fit our requirements of credibility are limited. I am not allowed to cite forum posts because technically anyone can say anything they want to with no proof. As for the testimonials on your site. That fails reliability for the same reasons as well as it being on your site. What this survey is for is to account for bias by getting feedback from users hopefully not connected with either product.

Thank you for your interest and help though. Personally, I feel that getting the same information from a large number of sources is a proof of reliability in itself. But since this needs to be structured, I need for it to be in the form of a survey for my professor to accept it.

Also, there's quite a bit of feedback on the Filastruder at least in these forums. Here's a few posts:

http://www.soliforum.com/topic/7834/jus … ut-buying/
http://www.soliforum.com/topic/7658/my- … ce-so-far/
http://www.filastruder.com/pages/testimonials

Please, if you own and/or use one of these devices, copy and paste the corresponding link at the bottom of this post into your address bar. This should take you to a survey on surveymonkey.com. These surveys are only four questions long and are multiple choice. I have split them into two surveys so that an individual that owns and/or uses both extruders may give input on both of them. If you only own and/or use one of these extruders, only fill out the survey for the one you own and/or use. They are clearly labeled and each survey also refers to which device the survey is asking about in each question so there will hopefully be no confusion.

Thank you for your time.

Filabot Survey               
surveymonkey.com/s/58Y8LZM

Filastruder Survey
surveymonkey.com/s/5S73K6Y