SoliForum - 3D Printing Community — Is there a minimum size of the print for Da Vinci 1.0?

Re: Is there a minimum size of the print for Da Vinci 1.0?

2014-10-22T15:35:05Z

Probably caused by XYZware, which has good but not great slicers. Try Slic3r.

After that, the print might still fail, and it's a common problem for all 3d printers.

if your object is smaller than the margin of error of that printer, then it will be very difficult to product that part.

Also, because of the nature of heating plastic of all 3d printers, if the part is too small, and the printer keeps racking up layers without the previous layer cools down sufficiently, the print will be too soft and friction of the nozzle will drag your print all over the place.

One work around, just as ShadowWizrd posted, is to import 2-3 of the identical parts at the same time. This way, when the printer is printing object B and C, object A can have some time to harden a little.

and FYI, always save your STL file with one object and then import multiple STL files using XYZWare. If you include multiple objects in a single STL file, Da Vinci will act funny and build in order of objects instead of layers, meaning it will create an obstacle for itself.

Re: Is there a minimum size of the print for Da Vinci 1.0?

2014-10-21T00:49:33Z

You can import 2 models. That may be a workaround. Add your 1 MM print, and then something else a bit bigger. Position them in different places on the bed, and maybe that will help.

Is there a minimum size of the print for Da Vinci 1.0?

2014-10-20T18:20:05Z

I'm trying to print some small parts and the printer just doesn't want to.
I can see that it's receiving the job and after that just goes back to the menu without any error or warning.

This happens only on small parts. For the rest it starts as expected.

By small part I mean 1mm thick. This is one of the parts that doesn't want to print.