<![CDATA[SoliForum - 3D Printing Community — Printing poorly near holes in the wall]]> 2014-06-16T22:49:02Z PunBB https://www.soliforum.com/topic/6731/printing-poorly-near-holes-in-the-wall/ <![CDATA[Re: Printing poorly near holes in the wall]]> I don't see anything wrong with the part itself.  I would try slicing it in a different program.

Try slicing it with KISSlicer and uploading that g-code to RH.  Make sure you make setting adjustments in KS to match your Slic3r profiles.

http://kisslicer.com/

]]> https://www.soliforum.com/user/55/ 2014-06-16T22:49:02Z https://www.soliforum.com/post/58752/#p58752 <![CDATA[Re: Printing poorly near holes in the wall]]> Yes, Slic3r 0.9.9 for slicing.

STL attached.

]]> https://www.soliforum.com/user/3560/ 2014-06-16T19:51:04Z https://www.soliforum.com/post/58749/#p58749 <![CDATA[Re: Printing poorly near holes in the wall]]> Can I assume you are using Slic3r to slice this?  Can you post the .stl?

]]> https://www.soliforum.com/user/55/ 2014-06-16T19:34:21Z https://www.soliforum.com/post/58747/#p58747 <![CDATA[Printing poorly near holes in the wall]]> I'm having trouble on this print. Near the holes that are supposed to be in the wall near the top of the print, the printer fails to make a nice solid wall.

As you can see in the photos, the bottom 2/3 of the print looks great, but when the printer gets to the holes near the top, the walls are poorly filled in and very weak. I tried rotating the print 90 degrees on the Z axis on the printbed to see if that would help, but it didn't...all 3 of the prints have the same problem.

The last image shows the gcode for the area looks good - like I want it to print - but for some reason the printer is failing.

Any ideas?  Thanks!

]]> https://www.soliforum.com/user/3560/ 2014-06-15T20:29:11Z https://www.soliforum.com/post/58697/#p58697