<![CDATA[SoliForum - 3D Printing Community — Other Printer software]]> 2014-05-30T05:04:54Z PunBB https://www.soliforum.com/topic/6557/other-printer-software/ <![CDATA[Re: Other Printer software]]> IanJohnson wrote:

It will probably control the printer as well, but I don't know enough about the DaVinci to say for sure.

It does if you reflash the firmware. big_smile

]]> https://www.soliforum.com/user/221/ 2014-05-30T05:04:54Z https://www.soliforum.com/post/57389/#p57389 <![CDATA[Re: Other Printer software]]> Netfabb will save STLs, you have to go to Export Part to do it.  It won't control the printer unless you pay, but you can still set up STLs.  You can also plenty of scaling and positioning with Repetier, better than Replicator G.  It will probably control the printer as well, but I don't know enough about the DaVinci to say for sure.

]]> https://www.soliforum.com/user/14/ 2014-05-30T04:58:27Z https://www.soliforum.com/post/57387/#p57387 <![CDATA[Re: Other Printer software]]> it worked on 75% one piece was still black. but I can deal without.. thats for the tip.. is their a firmware to use with slicr without moding my firmware on my printer?

]]> https://www.soliforum.com/user/6054/ 2014-05-30T01:14:15Z https://www.soliforum.com/post/57376/#p57376 <![CDATA[Re: Other Printer software]]> Lol, sorry your right its a hexapod robotic spider.. based on Arduino, but I'm modifying it to work with Pixy cam for visual identification

]]> https://www.soliforum.com/user/6054/ 2014-05-29T17:02:24Z https://www.soliforum.com/post/57321/#p57321 <![CDATA[Re: Other Printer software]]> smile I saw your pic.
I assumed that being called "legs" it was part of a bigger model, like a killer robot or something

Download the slic3r app I linked to.

Run it, and under file menu, select "Repair STL". Point it to your stl, and let it do it's job.

After you try, report back here to say if it worked or not.

Cheers

]]> https://www.soliforum.com/user/6047/ 2014-05-29T15:13:15Z https://www.soliforum.com/post/57304/#p57304 <![CDATA[Re: Other Printer software]]> the attached pic in my last post is what I'm trying to print.  when i try to print the dark color in the picture doesn't print just the green.

]]> https://www.soliforum.com/user/6054/ 2014-05-29T15:09:36Z https://www.soliforum.com/post/57303/#p57303 <![CDATA[Re: Other Printer software]]> try RepligatorG: replicat . org / download (remove spaces)

It will rotate, scale, move your model, and after doing that it will place it flat on the bed. (In some cases in can't do it automatically, but will get pretty close)

edit: If you need to chop a large model into multiple pieces, you could also try the latest version of Slic3r: slic3r . org / download

edit2: Just curious: what are you trying to print?

]]> https://www.soliforum.com/user/6047/ 2014-05-29T14:04:47Z https://www.soliforum.com/post/57289/#p57289 <![CDATA[Re: Other Printer software]]> I just tried NetFabb it doesn't see serial printers.. lol and its $300, the basic doesn't save to .stl files..

the picture I just attached is what I'm trying to print, and when I do I only get the green side.. I'm pretty new at this so any help is appreciated..

]]> https://www.soliforum.com/user/6054/ 2014-05-29T02:54:53Z https://www.soliforum.com/post/57243/#p57243 <![CDATA[Re: Other Printer software]]> Netfabb will do that.  Just use the PC version.

]]> https://www.soliforum.com/user/2291/ 2014-05-29T02:28:45Z https://www.soliforum.com/post/57241/#p57241 <![CDATA[Other Printer software]]> Gang,

Anyone know of a good simple app I use to resize and flip .stl files that will print to the Davinci printer? the app that comes with the printer is to limited but I don't need anything to fancy..

]]> https://www.soliforum.com/user/6054/ 2014-05-29T02:26:12Z https://www.soliforum.com/post/57240/#p57240