2014-05-07T15:23:19Z PunBB https://www.soliforum.com/topic/6367/need-slicer-abs-filliment-defaults/ Thanks. I'll try those settings when I get home

]]> https://www.soliforum.com/user/1758/ 2014-05-07T15:23:19Z https://www.soliforum.com/post/55882/#p55882 Start with a filament diameter of 1.75mm and extrusion multiplier of about 0.80 (0.80-1.00 is pretty normal)
I use an E3D hot end, so my temps are 240 first layer / 230 the rest, but for a stock hotend start around 210.
I'm not a huge believer in accurate measurement of filament diameter, but certainly do a wall thickness calibration for the extrusion multiplier.

]]> https://www.soliforum.com/user/4515/ 2014-05-07T04:05:55Z https://www.soliforum.com/post/55850/#p55850 In slic3r (SD2) under the filament setting referring to Diameter and Extrusion Multiplier for ABS. What defaults to people have? I was messing with the settings and I think I totally messed them up.

]]> https://www.soliforum.com/user/1758/ 2014-05-07T01:05:48Z https://www.soliforum.com/post/55823/#p55823