<![CDATA[SoliForum - 3D Printing Community — Crazy prints]]> 2014-05-02T01:33:30Z PunBB https://www.soliforum.com/topic/6222/crazy-prints/ <![CDATA[Re: Crazy prints]]> travis7s wrote:

I set it to 205, I suspect the 215 may be the appropriate default for the new metal extruder but not sure...

What kind of new metal extruder are you using?

]]> https://www.soliforum.com/user/296/ 2014-05-02T01:33:30Z https://www.soliforum.com/post/55477/#p55477 <![CDATA[Re: Crazy prints]]> MartinFahrer wrote:

I noticed that too did you leave it at 215?  I set mine to 210.  I find that anyhigher and my ABS Material looks a little burnt.

Likewise.

]]> https://www.soliforum.com/user/4768/ 2014-05-02T01:25:12Z https://www.soliforum.com/post/55474/#p55474 <![CDATA[Re: Crazy prints]]> I set it to 205, I suspect the 215 may be the appropriate default for the new metal extruder but not sure...

]]> https://www.soliforum.com/user/3257/ 2014-04-22T21:15:16Z https://www.soliforum.com/post/54797/#p54797 <![CDATA[Re: Crazy prints]]> I noticed that too did you leave it at 215?  I set mine to 210.  I find that anyhigher and my ABS Material looks a little burnt.

]]> https://www.soliforum.com/user/3970/ 2014-04-22T21:01:57Z https://www.soliforum.com/post/54794/#p54794 <![CDATA[Re: Crazy prints]]> Problem solved...sort of.

I've been meaning to switch to a older PC to run the SD, so I did, and with a fresh copy of Repetier it printed properly.

One thing I notice is the new extruder default is 215, my old one was 195 I think!

]]> https://www.soliforum.com/user/3257/ 2014-04-22T20:00:12Z https://www.soliforum.com/post/54791/#p54791 <![CDATA[Re: Crazy prints]]> Y axis pulllies, belt tension on X and Y

]]> https://www.soliforum.com/user/3257/ 2014-04-22T14:28:21Z https://www.soliforum.com/post/54761/#p54761 <![CDATA[Re: Crazy prints]]> What have you calibrated?

]]> https://www.soliforum.com/user/4167/ 2014-04-22T00:38:23Z https://www.soliforum.com/post/54728/#p54728 <![CDATA[Crazy prints]]> I haven't used my SD3 in a while but I fired it up last week and starting running a bunch of cylindrical parts. The first dozen or so were fine but I noticed they were starting to get sloppy and less round.

I figured I needed to do circle calibration as I have done in the past, so I did, and I went to test print a nickel test piece that I have successfully printed before. See attachment for what I get.  Some sections are ok, some parts have huge gaps and some parts just don't make any sense to me.

Any ideas?

]]> https://www.soliforum.com/user/3257/ 2014-04-21T23:34:23Z https://www.soliforum.com/post/54722/#p54722