SoliForum - 3D Printing Community — Repetier-Host V0.95F

Re: Repetier-Host V0.95F

2014-05-01T17:34:00Z

I know this is an old threat but Brettski15 fixed my problem. How bizarre! Thanks again!

Re: Repetier-Host V0.95F

2014-03-20T00:33:32Z

Ok I had the same problem as you. What i figured out to do is go into the manual control. Click on the ok button down by the debug options. The I homed my extruder. This is the only way i can get it to work. Weird right. I just got a new computer with win 8 and it was a mess hooking up my sd2 up to it. Got it figured out though. Good luck to you.

Re: Repetier-Host V0.95F

2014-03-06T05:52:57Z

Running windows 8 64bit. Will try changing "Reset to Connect" --> "Disabled" tomorrow and check to see if I can heat the extruder/bed

Re: Repetier-Host V0.95F

2014-03-06T04:51:17Z

Can you heat the extruder and bed?

Re: Repetier-Host V0.95F

2014-03-06T01:14:06Z

Here's my .95F settings:

CONNECTION
Baud Rate: 115200
Transfer Protocol: Autodetect
Reset on Connect: Disabled
Reset on Emergency: Send emergency command and reconnect
Receive Cache Size: 127
Use Ping-Pong Communication: unchecked

PRINTER SHAPE
Printer Type: Classic Printer

Re: Repetier-Host V0.95F

2014-03-06T00:24:54Z

What OS are you running?

I've seen changing "RESET on CONNECT" to DISABLED has helped others.

Re: Repetier-Host V0.95F

2014-03-05T20:25:55Z

Any messages in the log?

Repetier-Host V0.95F

2014-03-05T19:53:48Z

Hello All,
Wanted to upgrade to the newest Repetier-Host software for the improved UI, but can't seem to get my printer to communicate.

Correct Com port
Baud: 250000
Transfer Proto: Auto
Reset on Connect: DRT low-->high-->low
Reset on Emergency: Send emergency command and reconnect
Receive Cache Size: 127
Use ping-pong communication: unchecked.

Printer Type: Classic Printer
everything set to 150mm

Click connect, takes a few seconds and turns green. but when I try to give a manual command, it goes "#" Command Waiting.

HELP!

-Ryan