<![CDATA[SoliForum - 3D Printing Community — Sudden increase in speed]]> 2014-03-07T11:04:10Z PunBB https://www.soliforum.com/topic/5750/sudden-increase-in-speed/ <![CDATA[Re: Sudden increase in speed]]> all my speeds are below 75 mm/sec.

Like I said, this happened out of nowhere.

I have tried other slicers but they are less user friendly to set up and use. You can't beat RH and slic3r for ease of use. One of the things I find really useful about RH is being able to orientate parts in any direction before slicing.

]]> https://www.soliforum.com/user/1178/ 2014-03-07T11:04:10Z https://www.soliforum.com/post/51607/#p51607 <![CDATA[Re: Sudden increase in speed]]> Check your speeds within the Slic3r settings.  I try to keep mine under 75mm/sec.  Lower if I am printing something complex.  I don't believe that it is a Slic3r bug, but I don't use Repetier anymore, so it could be a bug in that.

]]> https://www.soliforum.com/user/1142/ 2014-03-05T02:28:56Z https://www.soliforum.com/post/51452/#p51452 <![CDATA[Sudden increase in speed]]> Out of nowhere all my prints have started printing too fast to that point that they won't print unless the manual control is turned down to 50%. Seems to have got worse recently whereby it speeds up even more after first layer.

I have gone back to the original 0.3mm solidoodle profile too (downloaded from here: http://www.soliforum.com/topic/2485/ori … your-own/)

Sliced using Slic3r in Repetier host

0.5mm nozzle (j-head)

I also just finished completely recalibrating everything.

Is this a bug in the latest RH or Slic3r update?

]]> https://www.soliforum.com/user/1178/ 2014-03-04T16:57:15Z https://www.soliforum.com/post/51420/#p51420