SoliForum - 3D Printing Community — Printer not printing right?

Re: Printer not printing right?

2012-11-15T22:19:14Z

elmoret wrote:

You need to level the bed and set the z-offset.
http://solidoodletips.wordpress.com/201 … st-layers/
Use the z-offset screw on the back wall of the printer, and the front two screws in the bed. Slide a piece of paper between the nozzle and the bed, and tweak until the paper has some resistance on all parts of the bed.

We need to get a diagram of this with new printers.

Re: Printer not printing right?

2012-11-12T14:52:16Z

You need to level the bed and set the z-offset.

http://solidoodletips.wordpress.com/201 … st-layers/

Use the z-offset screw on the back wall of the printer, and the front two screws in the bed. Slide a piece of paper between the nozzle and the bed, and tweak until the paper has some resistance on all parts of the bed.

Printer not printing right?

2012-11-12T13:48:02Z

Hi guys, just got my unit a week ago and finally had some time to get things started.
The printer came broken and the guys at solidoodle were kind enough to send me the X-axis apparatus (minus the print head). I installed it and turned the machine on. It vibrated for a while at initiation and then went on standby.
I went through all the steps as per the website and finally was ready to print.
On print this is what happens. (not sure how to attach youtube videos on this forum)

I am not sure if this vibration is normal when it goes to the x-y home
The print bed seems to be at the right temperature but the plastic will not adhere
The printer just lays the plastic in squiggles instead of a straight cable

Apart from that, it's all just great! (a little optimism here)
I have attached my printer settings as well and I am just trying to print the test stl file that comes with Pronterface.
Any help would be great and apologies if I posted in the wrong forum.

Thanks.