SoliForum - 3D Printing Community — Repetier-host v095c Sequential printing issue

Re: Repetier-host v095c Sequential printing issue

2014-01-04T02:23:10Z

yup. it's saying it's 1.0.0RC2
did anyone tried sequential print with the newest software?

Re: Repetier-host v095c Sequential printing issue

2014-01-03T14:16:16Z

One way to check if you copied slicer corrects is go to slicer tab hit configure. When the SLICER configure screen pops up it will say in the bottom left corner the version "VERSION 1.0.0.RC2"

Re: Repetier-host v095c Sequential printing issue

2014-01-03T05:46:16Z

Mmm... updating to R2 didn't solve the problem... still see the traveling between two objects every layer.
am i doing it wrong?! I renamed the slic3r folder to slic3r_old and extracted the zip file..

Re: Repetier-host v095c Sequential printing issue

2014-01-02T15:52:51Z

Looks like this was fixed in SLIC3R RC2

Bugfixes:
•the Windows 64-bit package was missing an OpenGL library
•the Linux packages were missing XML::SAX thus weren't able to load AMF files
•a regression caused all perimeter holes to be completed doing contours instead of finishing one island at time
•retraction restarts ignored the extrusion_axis setting
•objects could not be repositioned in plater after hitting the Split button
•Z moves were skipped after the first object was complete when using Sequential Printing
•objects were incorrectly placed in exported STL files
•fixed a fatal error related to thin walls
•fixed random crashes (mostly visible on 32-bit Windows)
•the Avoid Crossing Perimeters implementation was rewritten in order to fix some regressions and make it faster
•fan wasn't enabled when vibration limit or another internal post-processor was enabled
•raft wasn't generated for the entire object footprint
•thin walls came out as zig-zag paths instead of straight lines
•narrow gaps were not infilled under certain circumstances

Repetier-host v095c Sequential printing issue

2014-01-02T04:43:43Z

Hello All,
I am running into this issue on RH v0.95c where when i set the sequential printing and check complete individual objects, it is still slicing the two objects together. I have Slic3r V.0.0RC1.

Did anyone test this functionality on RH? I only slice it, i didn't actually print it. but from the print head path, i can tell it's going traveling between two objects each layer.