<![CDATA[SoliForum - 3D Printing Community — 4043D PLA Settings]]> 2014-01-11T08:38:03Z PunBB https://www.soliforum.com/topic/5021/4043d-pla-settings/ <![CDATA[Re: 4043D PLA Settings]]> datasmasher wrote:

What is a presto cooker?  A crockpot?

Thanks!

Electric steamers, the guys are using them for parts finishing.
http://solidoodletips.wordpress.com/201 … -finisher/

]]> https://www.soliforum.com/user/1188/ 2014-01-11T08:38:03Z https://www.soliforum.com/post/46439/#p46439 <![CDATA[Re: 4043D PLA Settings]]> What is a presto cooker?  A crockpot?

Thanks!

]]> https://www.soliforum.com/user/2712/ 2014-01-10T22:50:53Z https://www.soliforum.com/post/46404/#p46404 <![CDATA[Re: 4043D PLA Settings]]> oops yes I did It has now been edited

]]> https://www.soliforum.com/user/3962/ 2014-01-05T13:46:25Z https://www.soliforum.com/post/45837/#p45837 <![CDATA[Re: 4043D PLA Settings]]> Did you miss a zero on that last measurement?

]]> https://www.soliforum.com/user/221/ 2014-01-05T02:46:05Z https://www.soliforum.com/post/45796/#p45796 <![CDATA[Re: 4043D PLA Settings]]> I have been playing around with my settings while purging and think I have come upon something that will work for pla without a winder. I have been using a temp of 155. with the 1.75mm nozzle and the height from the floor of 24.5 inches. This has given me filament with a diameter of 1.70 with +- 0.1mm with the vast majority of masurements having a +-0.05mm. (edit corrected error measurement typo)

]]> https://www.soliforum.com/user/3962/ 2014-01-05T02:14:52Z https://www.soliforum.com/post/45794/#p45794 <![CDATA[Re: 4043D PLA Settings]]> for PLA:

155-165C, you may get nipple twist if it was not fully tightened to begin with
Definitely predry. More info:

http://www.soliforum.com/topic/4108/my- … s-and-pla/

]]> https://www.soliforum.com/user/221/ 2014-01-01T15:55:36Z https://www.soliforum.com/post/45492/#p45492 <![CDATA[Re: 4043D PLA Settings]]> npeshman wrote:

Extruded at 160 I was receiving nipple twist.


Kinky....

]]> https://www.soliforum.com/user/1906/ 2014-01-01T15:35:06Z https://www.soliforum.com/post/45490/#p45490 <![CDATA[4043D PLA Settings]]> I searched the forums put couldn't find any information regarding the settings people use for pla and their results on their filastruder. Which is funny as I could have sworn I saw some before, particularly in the sticky thread. Anyway thought we could share some of the info in this thread for everyone.

So this is to discuss 4043D PLA (I obtained mine from Open Source Printing)

Extruded at 160 I was receiving nipple twist.

]]> https://www.soliforum.com/user/3962/ 2014-01-01T14:01:36Z https://www.soliforum.com/post/45487/#p45487