SoliForum - 3D Printing Community — Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

Re: Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2015-02-24T00:05:16Z

Thanks for the welcome, I know it's been a while. But now I'm having trouble and I need to get my posts up so I can link.

Re: Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2014-01-05T07:13:56Z

Welcome Pakiii glad to hear yours is working also.

Re: Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2014-01-05T06:43:08Z

I new and was having this same issue. A quick search on the forum and all is well. Cheers!

Re: Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2014-01-02T18:17:15Z

Great! Thx. This relaxes me.

Re: Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2014-01-01T12:41:04Z

Slicer -> Filament Settings tab -> Other Layers

Extrude auto-re-adjusted itself to 215 degrees on second layer!?!?

2014-01-01T10:01:16Z

I noticed something weird.

The first layer will print at whatever default extrude/bed temperature I adjusted. But right after the first layer, the extrude will re-adjust itself to 215 degrees and heat bed will re-adjust itself to 105 degrees.

I have already changed the default extrude to 195 degrees and the heat bed to 95 degrees, but the program will always auto-adjust it back to 215/105 right at the beginning of the second layer.

I have to lower the temperature back down to 195/95 again and it would run fine after that. But still kind of weird having a bug in there somewhere.

Any idea how to fix this? I'm sure this is a software issue. I haven't messed around with the Repetier yet because I just got the printer a few days ago.