<![CDATA[SoliForum - 3D Printing Community — Trouble with Large Prints]]> 2013-11-22T12:59:57Z PunBB https://www.soliforum.com/topic/4617/trouble-with-large-prints/ <![CDATA[Re: Trouble with Large Prints]]> Thanks Jabba.

I should also mention that i was able to print the part fine at 50% size. It's almost like the printer's afraid to make bigger parts!

Also, i'm using Repetier and Slic3r.

-k

]]> https://www.soliforum.com/user/3577/ 2013-11-22T12:59:57Z https://www.soliforum.com/post/42170/#p42170 <![CDATA[Re: Trouble with Large Prints]]> I just had something similar, my filament had unwound and knotted itself, so the extruder couldn't pull it through.  Check for free travel and easy unrolling.

]]> https://www.soliforum.com/user/3904/ 2013-11-22T02:09:25Z https://www.soliforum.com/post/42141/#p42141 <![CDATA[Trouble with Large Prints]]> Hi all,

I've been having moderate success with my SD2 while printing small things (gears and whatnot), but I can't seem to get anything larger to print. I'm currently working on a clock body - a cylinder with a .1" wall at the bottom, 5" dia. The skirt and brim go down with no issues, but once the first layer starts to print, instead of smooth, straight lines, i get tiny dots and scribbles, then it stops extruding all together.
Is there any explanation for this?

Thanks in advance,

-k

]]> https://www.soliforum.com/user/3577/ 2013-11-21T23:55:55Z https://www.soliforum.com/post/42137/#p42137