SoliForum - 3D Printing Community — Solidoodle 3 Extruder wont move

Re: Solidoodle 3 Extruder wont move

2013-11-20T02:21:35Z

Grinding was the motor. Hubby came home and found that the extruder was stuck to one side due to.......... little to much hair spray on the rails. So a good cleaning and grease. Works well.

Re: Solidoodle 3 Extruder wont move

2013-11-19T18:03:03Z

muddtt wrote:

Screen shots of settings or video of movement or both.

I will try to get some later if I can.

Re: Solidoodle 3 Extruder wont move

2013-11-19T16:57:36Z

wolfy454 wrote:

Our RH hasn't shown the model being printed on the view in months

How about if you load the STL file rather than GCode. Can you see it on the grid there?

Re: Solidoodle 3 Extruder wont move

2013-11-19T16:53:08Z

Screen shots of settings or video of movement or both.

Re: Solidoodle 3 Extruder wont move

2013-11-19T16:28:15Z

3d-oodler wrote:

Could be that the axes aren't homed.
Could be a bad slice. Does RH show the model on the print bed floor?

Our RH hasn't shown the model being printed on the view in months, but this is the first time the extruder has ever done this. I will have to check the axes, and any other options people suggest might be causing it to do this

Re: Solidoodle 3 Extruder wont move

2013-11-19T15:47:42Z

Could be that the axes aren't homed.

Could be a bad slice. Does RH show the model on the print bed floor?

Re: Solidoodle 3 Extruder wont move

2013-11-19T14:37:26Z

its probably stuck moving because the motors are engaged.

unplug everything and see if the head moves (gently)

I cant really help why its not moving programatically.

Solidoodle 3 Extruder wont move

2013-11-19T12:17:55Z

Just tried to print, and the extruder will only move up/down along the side of the printbed instead of on it. I cant even manually move it side to side. How do I get it unstuck?