<![CDATA[SoliForum - 3D Printing Community — air bladder under bed]]>2013-11-11T00:05:59ZPunBBhttps://www.soliforum.com/topic/4425/air-bladder-under-bed/<![CDATA[Re: air bladder under bed]]>So we are talking about a thermarest for a borosilicate plate?]]>https://www.soliforum.com/user/3054/2013-11-11T00:05:59Zhttps://www.soliforum.com/post/41267/#p41267<![CDATA[Re: air bladder under bed]]>You still would have a change in temperature, especially if it's in an enclosure. You wouldn't need much of a temperature change to mess around with the layers.
But, on the offhand you get it done, let us know about it.
]]>https://www.soliforum.com/user/1175/2013-11-04T17:58:12Zhttps://www.soliforum.com/post/40683/#p40683<![CDATA[Re: air bladder under bed]]>what i was thinking about was putting the air bladder between 2 plates with the heat bed on the top plate.]]>https://www.soliforum.com/user/187/2013-11-03T18:23:06Zhttps://www.soliforum.com/post/40634/#p40634<![CDATA[Re: air bladder under bed]]>Not unless you were to build a system that would compensate for the change in temperatures (p1/t1 = p2/t2) and the related change in pressure and thus volume of the air bladder so the bed wouldn't impact the print head whenever you had a temperature change.
In other words, this would be almost a nightmare.
]]>https://www.soliforum.com/user/1175/2013-11-03T18:05:27Zhttps://www.soliforum.com/post/40631/#p40631<![CDATA[Re: air bladder under bed]]>]]>https://www.soliforum.com/user/1906/2013-11-01T20:58:12Zhttps://www.soliforum.com/post/40506/#p40506<![CDATA[air bladder under bed]]>it has been my experience that springs tend to hang on occasion ( if you bump the bed the spring will move and hang I have been thinking of using an air bladder system under the bed. air pressure would keep the pressure even on all points of the bed.
]]>