<![CDATA[SoliForum - 3D Printing Community — double e3d bowden extruder features request]]> 2013-10-25T15:30:46Z PunBB https://www.soliforum.com/topic/4335/double-e3d-bowden-extruder-features-request/ <![CDATA[Re: double e3d bowden extruder features request]]> I dont know if it helps, but this is the design I made for a dual E3d bowden setup. Feel free to raid it for ideas...

http://www.thingiverse.com/thing:157817

http://thingiverse-production.s3.amazonaws.com/renders/32/4d/6b/af/a6/photo_2_preview_featured.jpg

]]> https://www.soliforum.com/user/1737/ 2013-10-25T15:30:46Z https://www.soliforum.com/post/39940/#p39940 <![CDATA[Re: double e3d bowden extruder features request]]> supraflyer wrote:

Thanks Adrian
I really like the extruders as close as possible. I was thinking that a fan might be mounted behind the extuders above the 8mm slide bars and cool both the fans and the print. Do you think that would be possible?

You can't combine the active-cooling required with the E3D with a print-cooling fan - one needs to be g-code controlled PWM and shutoff quite often, the other needs to be always on... but in a Bowden setup you no longer have a huge stepper motor sitting ontop of the x-carriage.. so you have an ideal spot to plonk down a DC Blower Fan and run a very short piece of tubing to aim it at the nozzles (or run a splitter and aim directly at both nozzles) - something like this fella lying flat on its back with the exit pointed towards the extruders and then a short piece of plumbing to direct it properly (I've got a brass nozzle I made up, but teflon or PVC will work fine): http://t1.gstatic.com/images?q=tbn:ANd9GcTH99LeJaJQ6iyUPjre7GDgKmXjDBJdcwRSVd6grRZxxyWfYrNH

]]> https://www.soliforum.com/user/663/ 2013-10-25T05:11:31Z https://www.soliforum.com/post/39910/#p39910 <![CDATA[Re: double e3d bowden extruder features request]]> I'll probably be rigging it up again this weekend as I might have a spare few hours to fiddle again, so I'll grab some pics of it all installed. I've also since changed my cold-end stepper setup to a much more minamalistic version...

elmoret wrote:
adrian wrote:

Impressive innovation

I feel like you must not have time for sleeping.

Sleep is for the weak wink LOL... I'm a 5 hours-a-night sorta guy wink Now if only I didn't have a damn day job that seems to suck 90% of my time at the moment..... big_smile

]]> https://www.soliforum.com/user/663/ 2013-10-25T05:08:23Z https://www.soliforum.com/post/39908/#p39908 <![CDATA[Re: double e3d bowden extruder features request]]> adrian wrote:

Impressive innovation

I feel like you must not have time for sleeping.

]]> https://www.soliforum.com/user/221/ 2013-10-24T19:09:35Z https://www.soliforum.com/post/39868/#p39868 <![CDATA[Re: double e3d bowden extruder features request]]> Thanks Adrian
I really like the extruders as close as possible. I was thinking that a fan might be mounted behind the extuders above the 8mm slide bars and cool both the fans and the print. Do you think that would be possible?

]]> https://www.soliforum.com/user/99/ 2013-10-24T18:00:48Z https://www.soliforum.com/post/39862/#p39862 <![CDATA[Re: double e3d bowden extruder features request]]> innovate wrote:

This is cool Adrian!

+1

]]> https://www.soliforum.com/user/1906/ 2013-10-24T11:14:42Z https://www.soliforum.com/post/39832/#p39832 <![CDATA[Re: double e3d bowden extruder features request]]> innovate wrote:

This is cool Adrian! Do you have this setup on your SD?

intermittently, yes. I need to spend a bit more time fine-tuning the bowden tube lengths to minimize flexion effects...

]]> https://www.soliforum.com/user/663/ 2013-10-24T10:14:05Z https://www.soliforum.com/post/39829/#p39829 <![CDATA[Re: double e3d bowden extruder features request]]> This is cool Adrian! Do you have this setup on your SD?

]]> https://www.soliforum.com/user/2743/ 2013-10-23T21:08:07Z https://www.soliforum.com/post/39764/#p39764 <![CDATA[Re: double e3d bowden extruder features request]]> You mean like this, which looses 10mm of build space ? smile

Heres the sketch up and stls .. the main block uses a 40mm fan in place of 2x30mm, and you can snap off or edit the model to trim the side pieces of the fan shell to be level with the mounting block.

Attaches to lawsy's carriage or the stock sd one.

Do you want the cold-end stepper models too wink

https://lh3.googleusercontent.com/-sYXzP-dhuJo/UiC8br4Yc3I/AAAAAAAAIuU/zcG1s4xmzPY/w622-h829-no/20130831_013747.jpg
https://lh6.googleusercontent.com/-KQvB4Usgge0/UiC8WPD1jAI/AAAAAAAAIuI/p5yUGGZa2hg/w622-h829-no/20130831_013731.jpg
https://lh3.googleusercontent.com/-7wxn7KCT078/UiC8vx00hHI/AAAAAAAAIu0/JQdG4AI3eK8/w1105-h829-no/20130831_013844.jpg

]]> https://www.soliforum.com/user/663/ 2013-10-23T13:58:23Z https://www.soliforum.com/post/39725/#p39725 <![CDATA[double e3d bowden extruder features request]]> I am trying to desing a double bowden e3d for the SD2. I think I have my head around the dimensional issues and have the following design features/restraints in mind.
1) maintain full z axis travel
2) minimize the distance between the extruder nozzles
3) maintain front view of nozzles( no fans in the way)
4) make the double easily removable for full sized prints
5)
Just a short list

Can you please provide your thoughts on what additional features that would be good?
Thanks

]]> https://www.soliforum.com/user/99/ 2013-10-23T13:35:24Z https://www.soliforum.com/post/39723/#p39723