<![CDATA[SoliForum - 3D Printing Community — Fillament from Amazon]]> 2013-10-17T15:03:56Z PunBB https://www.soliforum.com/topic/4223/fillament-from-amazon/ <![CDATA[Re: Fillament from Amazon]]> Where is this local santa clara place? Im in san jose!

]]> https://www.soliforum.com/user/3491/ 2013-10-17T15:03:56Z https://www.soliforum.com/post/39200/#p39200 <![CDATA[Re: Fillament from Amazon]]> Take the white roll back.  Octave has shown in the past that they are willing to replace filament that turns out to be brittle.

]]> https://www.soliforum.com/user/14/ 2013-10-17T13:47:16Z https://www.soliforum.com/post/39193/#p39193 <![CDATA[Re: Fillament from Amazon]]> I did a search of various online retailers and found a local Octave dealer and bought 4 roles, available for local pickup (Santa Clara CA.)  The packaging on the roll of white was very difficult to remove and I had problems with the filament breaking during the printing process.  The purple roll I bought prints like a dream.  I have not tried the green or gold rolls yet.
I found the White filament to have cracks about 1/2 way through the diameter and the flexing required for feeding from the back of the printer was to much for this roll, (it might work better now that I am feeding from the top after enclosing my printer to retain the heat and reduce warping.)

]]> https://www.soliforum.com/user/3619/ 2013-10-17T10:27:18Z https://www.soliforum.com/post/39182/#p39182 <![CDATA[Re: Fillament from Amazon]]> Hazer wrote:

Zentoolworks ABS from Amazon is the best I have seen yet.

+1

This is my first roll, and it's going swimmingly

]]> https://www.soliforum.com/user/3560/ 2013-10-14T15:07:08Z https://www.soliforum.com/post/38903/#p38903 <![CDATA[Re: Fillament from Amazon]]> Zentoolworks ABS from Amazon is the best I have seen yet. Every time I think theres something wrong with my printer, I load this back in and WALA! everything is fine again.

Octave is OK and a little cheaper, but I keep falling back to the Zentoolworks as the high-quality base for comparison.

]]> https://www.soliforum.com/user/2747/ 2013-10-13T20:44:21Z https://www.soliforum.com/post/38829/#p38829 <![CDATA[Re: Fillament from Amazon]]> Hunter Green wrote:

While I've had good results with SainSmart, the Octave available on Amazon is very consistent.

I've read some good things about sainsmart but for some reason on my doodle it shows variable depositon rates, even though linear feed rate is in cal. I get wavy/bubbly patterns on my solid layers using sainsmart. I'll try Octave...

]]> https://www.soliforum.com/user/1923/ 2013-10-13T20:09:41Z https://www.soliforum.com/post/38828/#p38828 <![CDATA[Re: Fillament from Amazon]]> While I've had good results with SainSmart, the Octave available on Amazon is very consistent.

]]> https://www.soliforum.com/user/1356/ 2013-10-13T18:35:40Z https://www.soliforum.com/post/38823/#p38823 <![CDATA[Fillament from Amazon]]> I need to buy some abs fillament. Since solidoodle charges like $14 for SH i am not going to buy from them... I bought off amazon a spool for $30, SainSmart 1.75mm ABS Filament 1kg/2.2lb for 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle..., but it has inconsistent diameter resulting in inconsistent deposition rate. Can any one suggest a GOOD ABS filament from Amazon that has consistent diameter and is reasonably priced? Bonus points if it is available for prime shipping.

Thanks

]]> https://www.soliforum.com/user/1923/ 2013-10-13T17:18:19Z https://www.soliforum.com/post/38820/#p38820