where did you get the tray?

http://www.amazon.com/gp/product/B00E3W … &psc=1

This fits the SD2 quite well.

***Updated***
Finally got the clear tray everyone is using. Laid down some medium density weather seal. It actually creates a really nice seal when I just lay the tray down on top. Had some weather seal left over so I added it to my clear panel as well. Also added some different type of weather seal to the doors. I found that the "D" shape compresses much more easily than the solid foam stuff. Makes it easy for the door to close and seal.

where did you get the tray?

Here's my ghetto case mod so far Even has a hinge with a magnet.

Got lucky at Lowes and picked up 2 clear plastic pieces for $2. He said normally he's allowed to cut and give away scrap for free, but the manager got a little picky. No complaints with $2.

Nice. I just use a Reflectix coozy. Wrap one sheet around the 3 sides and tie it off with jute, and another piece set on top with a "double pane" half a zip lock bag plastic window taped in it. So that is my red neck ghetto rig.

I find I only feel the need to use it for printing a lot of separate pieces that would cool down too much and maybe have delamination problems later. Like all the hubs for this dome in one go for instance. http://www.thingiverse.com/thing:157783

The Reflectix I mention, in case you do not know, is a foil faced bubble wrap, great stuff, sells for around $0.40/ft2 by me.

Got lucky at Lowes and picked up 2 clear plastic pieces for $2. He said normally he's allowed to cut and give away scrap for free, but the manager got a little picky. No complaints with $2.