<![CDATA[SoliForum - 3D Printing Community — Looking to replace SD3 Hotend]]> 2013-09-15T21:00:22Z PunBB https://www.soliforum.com/topic/3906/looking-to-replace-sd3-hotend/ <![CDATA[Re: Looking to replace SD3 Hotend]]> OK,
So i made the move and ordered a E3D.
Thanks for all your help guys..
G

]]> https://www.soliforum.com/user/2907/ 2013-09-15T21:00:22Z https://www.soliforum.com/post/36428/#p36428 <![CDATA[Re: Looking to replace SD3 Hotend]]> G-unit wrote:
2n2r5 wrote:

I had some good luck with the printrbot ceramic extruder but it isn't a drop in replacement. you will need to switch to lawsy's mk4 or mk5 jigsaw replacement

Is this it ?  http://printrbot.com/shop/1-75mm-ubis-ceramic-hot-end/
Thanks G

Yep, that's it. The connectors obviously aren't the same so you will need to put new ones on. You will have to do that for any hotend you get though except the OEM.

It is also longer than the stock hotend so you will need a longer screw for the Z index screw. I used this hotend for quite a while before I got my E3D.

]]> https://www.soliforum.com/user/1906/ 2013-09-13T22:21:22Z https://www.soliforum.com/post/36270/#p36270 <![CDATA[Re: Looking to replace SD3 Hotend]]> 2n2r5 wrote:

I had some good luck with the printrbot ceramic extruder but it isn't a drop in replacement. you will need to switch to lawsy's mk4 or mk5 jigsaw replacement

Is this it ?  http://printrbot.com/shop/1-75mm-ubis-ceramic-hot-end/
Thanks G

]]> https://www.soliforum.com/user/2907/ 2013-09-13T20:03:37Z https://www.soliforum.com/post/36261/#p36261 <![CDATA[Re: Looking to replace SD3 Hotend]]> go for the E3d...

]]> https://www.soliforum.com/user/1737/ 2013-09-13T17:51:26Z https://www.soliforum.com/post/36243/#p36243 <![CDATA[Re: Looking to replace SD3 Hotend]]> saymo606 wrote:

others use j-heads..
http://www.ebay.com/sch/i.html?_sacat=0 … mp;_sop=15

I looked at that one, but it don't look like u can change the tip, or am i looking at that wrong ?
Thanks for your time.
Gary

]]> https://www.soliforum.com/user/2907/ 2013-09-13T16:17:12Z https://www.soliforum.com/post/36229/#p36229 <![CDATA[Re: Looking to replace SD3 Hotend]]> 2n2r5 wrote:

I had some good luck with the printrbot ceramic extruder but it isn't a drop in replacement. you will need to switch to lawsy's mk4 or mk5 jigsaw replacement

That is what i am using lawsy's mk5, so did u need to do a bunch of software changes ? .
Thanks for your time.
Gary

]]> https://www.soliforum.com/user/2907/ 2013-09-13T16:15:20Z https://www.soliforum.com/post/36228/#p36228 <![CDATA[Re: Looking to replace SD3 Hotend]]> 3d-oodler wrote:

It's not worth that price to replace the stock PEEK with another.

Many on this forum have endorsed the all-metal E3D, and you can add me to that list with this posting.

I looked at that one and it looks like a nice Hot end, maybe i should do that one.
Thanks for your time.
Gary

]]> https://www.soliforum.com/user/2907/ 2013-09-13T16:11:28Z https://www.soliforum.com/post/36227/#p36227 <![CDATA[Re: Looking to replace SD3 Hotend]]> others use j-heads..
http://www.ebay.com/sch/i.html?_sacat=0 … mp;_sop=15

]]> https://www.soliforum.com/user/456/ 2013-09-13T12:40:00Z https://www.soliforum.com/post/36199/#p36199 <![CDATA[Re: Looking to replace SD3 Hotend]]> I had some good luck with the printrbot ceramic extruder but it isn't a drop in replacement. you will need to switch to lawsy's mk4 or mk5 jigsaw replacement

]]> https://www.soliforum.com/user/1906/ 2013-09-13T06:04:04Z https://www.soliforum.com/post/36189/#p36189 <![CDATA[Re: Looking to replace SD3 Hotend]]> It's not worth that price to replace the stock PEEK with another.

Many on this forum have endorsed the all-metal E3D, and you can add me to that list with this posting.

]]> https://www.soliforum.com/user/815/ 2013-09-13T05:13:00Z https://www.soliforum.com/post/36180/#p36180 <![CDATA[Looking to replace SD3 Hotend]]> Hi,
I'm Looking to replace SD3 Hotend, is this one any good? http://www.ebay.com/itm/MG-Plus-Hot-End … 33827a46c9 or is there a better one i should get?
Thanks for your time.
Gary

]]> https://www.soliforum.com/user/2907/ 2013-09-13T02:46:34Z https://www.soliforum.com/post/36162/#p36162