<![CDATA[SoliForum - 3D Printing Community — Iron man helmet]]> 2013-09-10T23:44:38Z PunBB https://www.soliforum.com/topic/3797/iron-man-helmet/ <![CDATA[Re: Iron man helmet]]> Thank You for the Help

]]> https://www.soliforum.com/user/3012/ 2013-09-10T23:44:38Z https://www.soliforum.com/post/35869/#p35869 <![CDATA[Re: Iron man helmet]]> tapoutms wrote:

I always get the files in Thingiverse but the iron man helmet won't work for me the rest for the stuff the i get from Thingiverse i can print fine is only the iron man helmet i don't know why


Thingiverse doesn't have any quality control. Nothing preventing you from uploading bad files.

]]> https://www.soliforum.com/user/7/ 2013-09-10T13:57:50Z https://www.soliforum.com/post/35813/#p35813 <![CDATA[Re: Iron man helmet]]> I always get the files in Thingiverse but the iron man helmet won't work for me the rest for the stuff the i get from Thingiverse i can print fine is only the iron man helmet i don't know why

]]> https://www.soliforum.com/user/3012/ 2013-09-10T13:42:23Z https://www.soliforum.com/post/35811/#p35811 <![CDATA[Re: Iron man helmet]]> There a few of these on thingiverse, and even a couple that look like they printed OK. Maybe you can grab one of those, slice it and get it to work.

]]> https://www.soliforum.com/user/3054/ 2013-09-09T23:21:10Z https://www.soliforum.com/post/35758/#p35758 <![CDATA[Re: Iron man helmet]]> Has some one print the 3 part iron man helmet with there solidoodle 2 and can someone please post the Gcode so i can try to print it on my machine because i can't  make it work

]]> https://www.soliforum.com/user/3012/ 2013-09-09T23:09:00Z https://www.soliforum.com/post/35757/#p35757 <![CDATA[Re: Iron man helmet]]> thanks guys for your help

]]> https://www.soliforum.com/user/3012/ 2013-09-08T23:26:09Z https://www.soliforum.com/post/35579/#p35579 <![CDATA[Re: Iron man helmet]]> tapoutms wrote:

OK this is one of the Gcode Thank you guy's for the help

The Repetier-Host visualizer shows the mask being printed off in space below the bed.
Editing the gcode and removing or commenting out lines 6,7,8 gets it back on the bed. Though there appears to be more bad code in there that looks like it might cause a crash.
I am not sure it will print like that without supports, or maybe the model needs to be rotated to lay flat on its back.
And I am not sure where you got that gcode but you are either going to have to reproduce it correctly or fiddle with it to make it right.

]]> https://www.soliforum.com/user/3054/ 2013-09-07T14:19:41Z https://www.soliforum.com/post/35438/#p35438 <![CDATA[Re: Iron man helmet]]> tapoutms wrote:

yes i use Netfabb

Have you tried moving the z-tab up a  bit? The nozzle maybe too close in general.

]]> https://www.soliforum.com/user/7/ 2013-09-06T13:32:15Z https://www.soliforum.com/post/35352/#p35352 <![CDATA[Re: Iron man helmet]]> yes i use Netfabb

]]> https://www.soliforum.com/user/3012/ 2013-09-05T15:50:59Z https://www.soliforum.com/post/35279/#p35279 <![CDATA[Re: Iron man helmet]]> OK this is one of the Gcode Thank you guy's for the help

]]> https://www.soliforum.com/user/3012/ 2013-09-05T15:37:48Z https://www.soliforum.com/post/35276/#p35276 <![CDATA[Re: Iron man helmet]]> ronsii wrote:

Could you post  your gcode from slicing it?

You can also visually check the gcode output for errors in RH

]]> https://www.soliforum.com/user/7/ 2013-09-05T14:20:03Z https://www.soliforum.com/post/35261/#p35261 <![CDATA[Re: Iron man helmet]]> Is the filament getting caughtup? I once had made the mistake of thinking my printer was busted, only to realize that my spool was stuck & unable to spin, thus not allowing the filament to be fed into the machine.

In the  stl file, is object hovering above the ground? Or placed flat? If its not flat then that might be your problem....

]]> https://www.soliforum.com/user/402/ 2013-09-05T07:02:33Z https://www.soliforum.com/post/35236/#p35236 <![CDATA[Re: Iron man helmet]]> Could you post  your gcode from slicing it?

]]> https://www.soliforum.com/user/296/ 2013-09-05T05:36:06Z https://www.soliforum.com/post/35225/#p35225 <![CDATA[Re: Iron man helmet]]> Have you checked the extruder temp?

What is the thingiverse number? or can you attach the .STL so others can test it.

Have you run it through NetFabbb Cloud?

]]> https://www.soliforum.com/user/2861/ 2013-09-05T03:30:44Z https://www.soliforum.com/post/35210/#p35210 <![CDATA[Re: Iron man helmet]]> i print with the printer fine and i calibrate it but when i try to print the iron man helmet wont work the solidoodle 2 is acting like is printing but i see a little bit of filament coming out and the machine  go so slow and before i print i check the stl file and i center it in the middle of the heat bed. thank you

]]> https://www.soliforum.com/user/3012/ 2013-09-04T22:46:01Z https://www.soliforum.com/post/35193/#p35193