SoliForum - 3D Printing Community — replacement stepper motors

Re: replacement stepper motors

2013-08-18T23:30:44Z

chuddly wrote:

i had already read that but does that mean that the current stock motors are NEMA 17 and the X is NEMA 14? or because its listed under "compatible" that you can put NEMA 17's in with modifications or without? Its a VERY vague wright up

Come on man. Do a *little* legwork.

Take the Y-stepper for example: Pull the model number, google it. Check the specs, holding torque: 2.2kg-cm.

Do the same with the rest. Nothing changes in software as long as you use the same step angle.

Here's your homework: make the right up better. People have helped you, do your part.

Re: replacement stepper motors

2013-08-18T23:23:08Z

i had already read that but does that mean that the current stock motors are NEMA 17 and the X is NEMA 14? or because its listed under "compatible" that you can put NEMA 17's in with modifications or without? Its a VERY vague wright up

Re: replacement stepper motors

2013-08-18T20:56:43Z

http://www.soliwiki.com/List_of_compatible_hardware

replacement stepper motors

2013-08-18T20:12:52Z

My motors have not gone out yet but im wanting to have some spares on hand. What do i need for that. Are there any motors that are an easy upgrade to the current ones? If im not mistaken i think they are all NEMA 14 stock correct? If there are any mods that need done a link or explanation of how/what do to would be great. Mechanically i can handle the mod but in the software i am completely new and lost.

Thanks
Chad