SoliForum - 3D Printing Community — Poor print quality on certain spot

Re: Poor print quality on certain spot

2013-08-05T01:17:46Z

i get that same gap sometimes let me know what works for you ,Kucau

Re: Poor print quality on certain spot

2013-08-05T00:51:37Z

Try either increasing or decreasing the extrusion width. If the problem is happening just inside the external perimeter change the perimeter width, if it's happening farther in, change the default extrusion.

Slice, then check the generated code.

Re: Poor print quality on certain spot

2013-08-04T23:52:21Z

ronsii wrote:

That gap is from the slicer, which slicer are you using?

built in Slic3r in Repetiter for Solidoodle... but why the gap is consistent even using other design? any suggestion . thanks

Re: Poor print quality on certain spot

2013-08-04T23:49:31Z

That gap is from the slicer, which slicer are you using?

Poor print quality on certain spot

2013-08-04T23:42:24Z

Hi ,

Im having prob with print quality on certain spot. Have a look at the picture below , its a frame for Gopro Hero 3. First i thought it was design error as all frames i printed from the design having consistent quality issue on the same spot. So i downloaded another design from thingiverse and i keep on getting the same quality issue at the same spot. Any idea?