2013-08-04T08:18:36Z PunBB https://www.soliforum.com/topic/3431/bed-ramming-into-extruder-nozzle/ You need to adjust your z-offset screw..
http://wiki.solidoodle.com/first-layers … e-z-offset

]]> https://www.soliforum.com/user/663/ 2013-08-04T08:18:36Z https://www.soliforum.com/post/31857/#p31857 I took apart the extruder in order to remove a clog and I just finished reassembling the extruder.  While the plastic is now extruding fine, the calibration on the z-axis is off and the bed touches the nozzle when z = 7mm, making the nozzle ram into the print head at the start of any print.  I have tried correcting for this in the Slic3r settings, but the print bed continues to rise into the nozzle both at the start of a print and when moving to the home position.  I would really appreciate help as this is my first experience with a 3d printer.  Thanks!

]]> https://www.soliforum.com/user/2643/ 2013-08-04T07:59:12Z https://www.soliforum.com/post/31856/#p31856