SoliForum - 3D Printing Community — Print layer shifted to lef/right after 2nd layer onwards

Re: Print layer shifted to lef/right after 2nd layer onwards

2013-07-31T16:42:32Z

after tightening belts, you need to recalibrate your step per mm. I just recently calibrated mine.
http://www.soliforum.com/topic/3280/is- … -belt-off/

Re: Print layer shifted to lef/right after 2nd layer onwards

2013-07-31T00:22:27Z

thanks. i fixed the prob by tightening Y axis belt. however now my layers especially the first later is not uniformed ..the print is not spreading each strand of plastic into a flat layer. Have a look at the attached file . i`ve calibrated the Z-Axis and i even changed the extrusion multiplier from 0.7 to 0.8 but i still got the same result. Any idea ?

Re: Print layer shifted to lef/right after 2nd layer onwards

2013-07-30T03:25:17Z

Layer shifting is generally caused by the stepper motors not being able to overcome the forces trying to stop the printhead.... in your case it looks to be overextruding which is causing a lot of friction for the print nozzle to move and push through the previously printed layers.

check out these ---> http://wiki.solidoodle.com/solidoodle-1

Print layer shifted to lef/right after 2nd layer onwards

2013-07-30T01:21:16Z

Hi all,

Im a completely newbie in this 3d printingtechnical stuff , just got my Soliddodle 3 last week . Plug the machine, install bla bla bla and did bed levelling . Now i got this Print layer shifted to lef/right after 2nd layer onwards. Im clueless on how to fix this prob. TQ