I tried loading them both and they set the bed size for a sd2.
And are even labeled sd2.
Thought we were onto something there for a sec
]]>]]>Are you sure you using the right profile?
This is what happens when you have your Slic3r settings set up for a S2 when you actually have an S3 (or vice versa)
After you import those .ini files into slicer, you should be able to select the appropriate printer as John was trying to point out before.
]]>It's a how to for setting up the software for macs. It includes the .ini file to import into slic3r as well as a PDF for setting up RH.
]]>I know it is stupid to mention and you have probably thought of this already. When you go to the slicer screen of RH. Are you selecting the Solidoodle 3 setup to slice with? See photo below.
Definitely not stupid to mention! I'm glad you posted a picture of what your RH screen looks like. I'm on a Mac, so I'm not sure if that's what the difference is or I have the wrong version of RH... But there are no preloaded profiles for any printer. I've been building my own profile from what ever I've found on line, and trial & error.
At least there is some discrepancy to point to now. Thanks again for the screenshot, and any info you have on what could be my next step is greatly appreciated.
]]>
The only workaround I've been using is to move the object to the front left corner in the object placement screen. This works to center the object as long as the object isn't larger than about 5"x5".
]]>IanJohnson wrote:Post what you have as start gcode in Slic3r. THe problem may be there.
here are the first 30 or so lines of code:
; generated by Slic3r 0.9.9 on 2013-07-25 at 19:41:41
; layer_height = 0.35
; perimeters = 3
; top_solid_layers = 3
; bottom_solid_layers = 3
; fill_density = .4
; perimeter_speed = 30
; infill_speed = 60
; travel_speed = 130
; nozzle_diameter = 0.5
; filament_diameter = 1.67
; extrusion_multiplier = .90
; perimeters extrusion width = 0.42mm
; infill extrusion width = 0.42mm
; solid infill extrusion width = 0.42mm
; top infill extrusion width = 0.42mm
; support material extrusion width = 0.21mm
; first layer extrusion width = 0.53mmG21 ; set units to millimeters
M107
M104 S190 ; set temperature
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
M109 S190 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F1800.000 E-1.00000
G92 E0
G1 Z0.350 F7800.000
G1 X40.587 Y37.347
G1 F1800.000 E1.00000
G1 X42.027 Y35.877 F540.000 E1.15378could be something I'm overlooking... not sure
Have you been able to resolve the issue?
]]>Post what you have as start gcode in Slic3r. THe problem may be there.
here are the first 30 or so lines of code:
; generated by Slic3r 0.9.9 on 2013-07-25 at 19:41:41
; layer_height = 0.35
; perimeters = 3
; top_solid_layers = 3
; bottom_solid_layers = 3
; fill_density = .4
; perimeter_speed = 30
; infill_speed = 60
; travel_speed = 130
; nozzle_diameter = 0.5
; filament_diameter = 1.67
; extrusion_multiplier = .90
; perimeters extrusion width = 0.42mm
; infill extrusion width = 0.42mm
; solid infill extrusion width = 0.42mm
; top infill extrusion width = 0.42mm
; support material extrusion width = 0.21mm
; first layer extrusion width = 0.53mm
G21 ; set units to millimeters
M107
M104 S190 ; set temperature
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
M109 S190 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F1800.000 E-1.00000
G92 E0
G1 Z0.350 F7800.000
G1 X40.587 Y37.347
G1 F1800.000 E1.00000
G1 X42.027 Y35.877 F540.000 E1.15378
could be something I'm overlooking... not sure
]]>Remember you have to set both Repetier and Slic3r settings to the correct bed size if you only have one set it will do like you are seeing.
Do the numbers on repetiers screen near the arrows reflect where the print head is, ie...y=100, x=100 print head is in center when manually moving the printhead after homing it?
In slicers 'configure' screen under bed size when you save the profile make sure you reselect the profile when the requester box comes up after you click on save then when you are going to slice something make sure you select the profile you just saved in all the locations.
When manually moving the print head it seems that the 100mm setting for both x&y center would be correct.
But there is something superseding this setting when I go to print.
Off by about 2 inches to the right on the x axis, and almost the same to the back on the y axis.
I've changed setting in both RH & slic3r with no change to where a print starts.
I even tried changing the bed size to twice what it is with no change to where the print starts...
Is there a chance it's a firmware issue I'm having?!?
It's amazing I'm not the only one with this problem and there appears to be no solution to the problem.
How could this be?!?
...super frustrating, I should have saved some money and just gotten a solidoodle 2. All the extra real-estate is a waste in my machine!
Oh and thanks to the solidoodle employee that started responding to this post...after all your questions you were completely NO HELP!!!
]]>Do the numbers on repetiers screen near the arrows reflect where the print head is, ie...y=100, x=100 print head is in center when manually moving the printhead after homing it?
In slicers 'configure' screen under bed size when you save the profile make sure you reselect the profile when the requester box comes up after you click on save then when you are going to slice something make sure you select the profile you just saved in all the locations.
]]>Something is preventing me from changing the bed size and center.
No matter what I do to the settings nothing changes. The print starts to the back and to the right.
Anyone understanding my problem it would be greatly appreciated if you could "shed some light".
]]>