SoliForum - 3D Printing Community — bed stuck in topmost position

Re: bed stuck in topmost position

2013-07-25T13:41:31Z

Frediswizard wrote:

My Solidoodle 2's bed is stuck in the topmost position. The unit controls work (kinda) except they do not return to their start positions. The bed moves a 1/4" down then moves back up. The extruder moves to the left a 1/4" then returns to the corner. The motors are running but it appears the unit's XYZ are incorrect. How do I reset it?

Get it fixed?

Re: bed stuck in topmost position

2013-07-25T05:00:23Z

Have you tried hitting the home button (left bottom of directional arrows on manual control tab). This should reset all of the values to the correct home locations. (Y = 150, X=150, Z = 0) or something close to that

bed stuck in topmost position

2013-07-25T04:51:03Z

My Solidoodle 2's bed is stuck in the topmost position. The unit controls work (kinda) except they do not return to their start positions. The bed moves a 1/4" down then moves back up. The extruder moves to the left a 1/4" then returns to the corner. The motors are running but it appears the unit's XYZ are incorrect. How do I reset it?