SoliForum - 3D Printing Community — 3D Ink

Re: 3D Ink

2012-10-24T16:47:45Z

IanJohnson wrote:

The diameter on my clear was 1.55-1.66, and you could feel a little ripple. Either it's a different supplier, or they got a better batch. Either way, I'll probably order a spool from them since I'm afraid the one I have will clog my nozzle.

Have you had problems with bad filament from suppliers in the past?

Re: 3D Ink

2012-10-07T19:13:00Z

The diameter on my clear was 1.55-1.66, and you could feel a little ripple. Either it's a different supplier, or they got a better batch. Either way, I'll probably order a spool from them since I'm afraid the one I have will clog my nozzle.

Re: 3D Ink

2012-10-07T18:24:14Z

thanks for the link and interestign they have 3d resin to at a very nice price i wonder if its compatable with the form 1

Re: 3D Ink

2012-10-07T11:07:53Z

Manx the link is http://www.buy3dink.com/

Ian the clear looks perfect, I couldn't find any specks or bubbles in it at all. The dia is 1.77mm to 1.78mm from the 10ft of it that I checked.

Re: 3D Ink

2012-10-07T02:29:09Z

Have you looked at the clear yet? Judging from the spool, it might be the same manufacturer as the one I got which had bubbles and contaminants.

Re: 3D Ink

2012-10-07T02:28:59Z

can you tell us the link?

3D Ink

2012-10-07T00:49:23Z

I had ordered clear, red and blue but my order was mixed up with someone else's and I received the clear, red and two other colors I hadn't ordered. I contacted 3D Ink about the mix up and they quickly sent my missing spool of blue abs. I will be doing business with 3D Ink again.