2013-05-30T17:36:57Z PunBB https://www.soliforum.com/topic/2612/text/ OPPS  I edited my post

]]> https://www.soliforum.com/user/574/ 2013-05-30T17:36:57Z https://www.soliforum.com/post/24595/#p24595 Pic shows?  I don't see it.  Text (or any high resolution feature) is particularly susceptible to slicing choices.  By no means am I an expert, but I find the best success by forcing a single perimeter (to allow as much fill-in as possible), Extrude letters at least 0.4mm, but most importantly is the font choice.  I have the best luck with san serif fonts that have a fairly uniform brush width through the stroke of the letter, e.g., the width of all parts of a capital letter "C" are the same.  Also, I steer away from lower case unless the letters are big.

]]> https://www.soliforum.com/user/97/ 2013-05-30T17:07:15Z https://www.soliforum.com/post/24589/#p24589 I can print text to a certain degreee but as the pic shows , after slicing ,the numbers( same for letters) don't  fill in. Then it prints what it sees. I tried several fonts and sizes, same thing. Sliced at both .1mm and .3mm but no luck.

]]> https://www.soliforum.com/user/574/ 2013-05-30T14:40:46Z https://www.soliforum.com/post/24565/#p24565