2013-05-23T13:29:24Z PunBB https://www.soliforum.com/topic/2504/y-axis-does-not-move/ You might have some debris stuck under the screw also.  Make sure there are no little metal shavings underneath.

]]> https://www.soliforum.com/user/712/ 2013-05-23T13:29:24Z https://www.soliforum.com/post/23791/#p23791 I think i got it eventually. For at least one print it held by adjusting a few of those screws. Hopefully I found the sweetspot if not I can try what you suggest

]]> https://www.soliforum.com/user/1758/ 2013-05-23T11:34:19Z https://www.soliforum.com/post/23779/#p23779 You might need to add a drop of locktite to the screw to hold it in place.

]]> https://www.soliforum.com/user/46/ 2013-05-23T11:04:01Z https://www.soliforum.com/post/23772/#p23772 Ok, this is odd, seems I have to re-tighten the screw over and over and it keeps giving out in the first layer

]]> https://www.soliforum.com/user/1758/ 2013-05-22T23:35:17Z https://www.soliforum.com/post/23714/#p23714 well now it is not sticking at all but at least it is moving lol

]]> https://www.soliforum.com/user/1758/ 2013-05-22T23:14:57Z https://www.soliforum.com/post/23711/#p23711 Awesome.. glad to hear it!

]]> https://www.soliforum.com/user/1906/ 2013-05-22T23:11:47Z https://www.soliforum.com/post/23710/#p23710 I just fixed it, I think. There was a tiny hex bolt on the rod that came out of the Y motor, I tightened it. Now it seems to be moving.

]]> https://www.soliforum.com/user/1758/ 2013-05-22T23:10:01Z https://www.soliforum.com/post/23709/#p23709 Check to make sure the set screw y-axis motor pulley is tight on the motor shaft. Sorry to hear the out of the box problems. let's hope that we can get you printing quickly.

]]> https://www.soliforum.com/user/1906/ 2013-05-22T23:08:39Z https://www.soliforum.com/post/23708/#p23708 I just got my Soildoodle 2 today. The Y axis is not moving, I hear something trying to move. The X and Z move fine. When I press the Y axis I see a motor rod in the back spinning, but nothing happens and the belt does not move. I can manually move the Y axis but not via the controls. The rod on the motor spins but never moves the belt.

]]> https://www.soliforum.com/user/1758/ 2013-05-22T21:54:58Z https://www.soliforum.com/post/23698/#p23698