SoliForum - 3D Printing Community — Temperature settings issue

Re: Temperature settings issue

2013-05-17T06:04:23Z

Either you found a bug in repetier... .85 has some small bug fixes compared to .82b... or the thermistor type is set wrong for the hotend.

one other possibility is a hardware problem or wiring problem with the thermistor.

Re: Temperature settings issue

2013-05-17T03:07:11Z

Hi Ronsii

Thanks for your interrest

Actually, there are no temperature related to the reality, When I Heat the bed and / or the extruder the temperature rise but with a few degree where in reality it's really hot.

The actual temperature is 70C for the extruder witch is wrong and 7C whitch is also wrong.

Here a re some pictures.

I also try to upgrade the firmware and nothing work too ... it's fucking depressive

Re: Temperature settings issue

2013-05-17T02:38:54Z

What temperatures are being displayed, please give us an example.. is there a 30 degree difference or is it a larger difference? is the problem for both the extruder and the bed heater? some screen shots would be a great help to know what is happening with your SD3.

No picture in your above post.

Temperature settings issue

2013-05-17T01:12:29Z

Hi everyone, I have a big issue with my temperature setting.

It just won't measure the reality. When my extruder and bed reach a high temperature, repetier see a lower one. How can I solve this ?

I join a picture, obviously my extruder was at much more that 70C after 2 min of heat and so for my bed.

I bought my solidoodle 3 5 month ago and i still couldn't print anything. I'm desperate could you help me ?