<![CDATA[SoliForum - 3D Printing Community — Waste]]> 2013-06-24T13:32:30Z PunBB https://www.soliforum.com/topic/2084/waste/ <![CDATA[Re: Waste]]> PLA works great, but be aware, it is a lot more brittle than ABS. It doesn't flex, it just fails.
It also is not so great at fine detailed models, as the ooze tends to diminish the details.. and its a PITA to get bridging or short-layer time layers working (it tends to melt very badly when doing for example, the top of Yoda's head) without a fan

So if you want a thin walled durable piece, then use ABS. If you want fine surface detail use ABS. Everywhere else, you can use PLA.

]]> https://www.soliforum.com/user/663/ 2013-06-24T13:32:30Z https://www.soliforum.com/post/27728/#p27728 <![CDATA[Re: Waste]]> DesignerFred wrote:

I plan on using only PLA.... For the environment...hope it works out.

I just loaded up my first spool of PLA after several weeks of ABS. and i must say i may be hooked. the parts are stiffer, they stick like hell to a hairsprayed glass bed, and absolutely no warp issues! (switched to the PLA roll after catching hell trying to get the idler ends printed warp free in ABS for a set of rostock parts.)

ABS has its uses. for when you need a part to come into contact with higher temp areas (extruder fan/carriage), or when you want a part you can bring to a nice surface finish quickly and easily with acetone vapor. but other than that, i think i'll be joining you on the PLA quest! for great justice!

]]> https://www.soliforum.com/user/2041/ 2013-06-23T23:12:37Z https://www.soliforum.com/post/27671/#p27671 <![CDATA[Re: Waste]]> 2n2r5 wrote:

http://makibox.com/forum/topic/1554

look familiar?

they are knocking your design

That was good. My favorite part was when elmoret shut them up. Now that is how you stand behind you product.

/Wants a Filastruder more than ever now.

]]> https://www.soliforum.com/user/587/ 2013-06-20T10:17:24Z https://www.soliforum.com/post/27215/#p27215 <![CDATA[Re: Waste]]> Lol, well done Tim and Ian.

]]> https://www.soliforum.com/user/1906/ 2013-06-17T17:07:35Z https://www.soliforum.com/post/26692/#p26692 <![CDATA[Re: Waste]]> http://makibox.com/forum/topic/1554

look familiar?

they are knocking your design

]]> https://www.soliforum.com/user/1906/ 2013-06-17T04:51:47Z https://www.soliforum.com/post/26642/#p26642 <![CDATA[Re: Waste]]> This most definitely works:

http://www.kickstarter.com/projects/833 … t-extruder

smile

]]> https://www.soliforum.com/user/221/ 2013-06-17T04:40:41Z https://www.soliforum.com/post/26640/#p26640 <![CDATA[Re: Waste]]> At $150 that could be an expensive crayon drawing. There's no engineers I know that would try and sell you a physical object based on a drawing they did when they were like 6 (well I wouldn't anyway).
A working prototype would help them quite a lot, the concept is good, I have heaps of scrap and failed prints already, plus the suggestion here of blending scrap with virgin pellets is very sensible indeed.
Kind like when SD first announced the SD3, and the metal parts were all hand made, with dints and gouges. .. .. actually I think this pic is still on their page somewhere, but at least it showed there was a physical object, that looked like it would actually work.

]]> https://www.soliforum.com/user/1590/ 2013-06-17T04:34:56Z https://www.soliforum.com/post/26639/#p26639 <![CDATA[Re: Waste]]> They haven't shipped a Ramen. I don't think they've shipped any filament either.

]]> https://www.soliforum.com/user/221/ 2013-05-18T04:26:03Z https://www.soliforum.com/post/23172/#p23172 <![CDATA[Re: Waste]]> Has anyone seen this. I have been keeping an eye on this page. I don't know if anyone has actually received a ramen kit yet. I would love to know how well it works. I have blown $150 on much worse. (some scandalous bachelor parties come to mind)

http://makibox.com/details/product/ramen_kit

On a side note, they have ultra cheap filament that they make themselves.

http://makibox.com/printing-supplies

]]> https://www.soliforum.com/user/1906/ 2013-05-18T02:24:11Z https://www.soliforum.com/post/23158/#p23158 <![CDATA[Re: Waste]]> With all the experimentation of new materials I am curious if there's some sort of material that can be easily recyclable or compostable. I guess it might be time to buy a filastruder and breaking it for science.

]]> https://www.soliforum.com/user/642/ 2013-05-18T01:22:03Z https://www.soliforum.com/post/23150/#p23150 <![CDATA[Re: Waste]]> You can only do 15-25% recycle with ABS. Though I can't tell you where I got that number, I was reading about it the other day.

]]> https://www.soliforum.com/user/1533/ 2013-05-18T00:26:57Z https://www.soliforum.com/post/23146/#p23146 <![CDATA[Re: Waste]]> DesignerFred wrote:

I plan on using only PLA.... For the environment...hope it works out.

I went with PLA for that very reason, only to find out that it can't go into the yard waste or recycle bin. I don't have a yard, so I can't try to compost. Has anyone successfully composted bad pla prints?

]]> https://www.soliforum.com/user/18/ 2013-05-15T12:53:45Z https://www.soliforum.com/post/22865/#p22865 <![CDATA[Re: Waste]]> I tried creating ABS slurry from my waste so that maybe prints will start to properly stick to the bed.
No luck so far- after 3 days of keeping rafts in acetone I now have a soft blob of ABS. Anybody know how long it takes for that stuff to dissolve? Do I have to use ABS shavings instead !?

]]> https://www.soliforum.com/user/1107/ 2013-05-15T04:49:04Z https://www.soliforum.com/post/22843/#p22843 <![CDATA[Re: Waste]]> That blender is awesome!  I bet the thing could be a suitable grinder!

]]> https://www.soliforum.com/user/419/ 2013-05-15T04:34:02Z https://www.soliforum.com/post/22842/#p22842 <![CDATA[Re: Waste]]> The big thing here would be a melt filter. I have some parts on hand, but no time yet to experiment.

]]> https://www.soliforum.com/user/221/ 2013-05-14T16:31:13Z https://www.soliforum.com/post/22798/#p22798