SoliForum - 3D Printing Community — How I Hacked Da Vinci mini w+

Re: How I Hacked Da Vinci mini w+

2023-03-25T13:02:21Z

THE END
I'm selling my printer to upgrade. Good luck!

Re: How I Hacked Da Vinci mini w+

2023-03-12T11:57:39Z

NOPE NOPE NOPE THIS NO LONGER WORKS
Delete the program and reinstall it. Continue to press "decline" and block the internet access to it as well.

wertyshow wrote:

YOU CAN PRESS ACCEPT
So I finally decided to press "accept" on the boxes shown when the program is launched and nothing bad happened! So, it's safe to press accept.

Re: How I Hacked Da Vinci mini w+

2023-03-11T13:27:57Z

SOFTWARE COLLECTION
I found this yesterday, this may help to choose the best software for your printer. Also, it has XYZware.
https://www.xyzprinting.com/en-US/software
https://drive.google.com/file/d/1ioui29 … kEYlV/view

Re: How I Hacked Da Vinci mini w+

2023-03-06T11:25:29Z

YOU CAN PRESS ACCEPT
So I finally decided to press "accept" on the boxes shown when the program is launched and nothing bad happened! So, it's safe to press accept.

Re: How I Hacked Da Vinci mini w+

2023-02-25T12:40:08Z

UPDATED FILES LIST - ADDED XYZWARE FLASH TOOL
Downgrade or upgrade your printer to version 1.2.4 for the best result! Upgrading further won't make this hack work!! At least when I tried it (bye bye two NCF213 tags...).

Re: How I Hacked Da Vinci mini w+

2023-02-16T11:56:50Z

PETG WON'T WORK!!
I tried making PETG tags but they didn't work. Instead make the settings advanced and edit the temperature.
Works like a charm!

How I Hacked Da Vinci mini w+

2023-01-31T12:13:28Z

Hey everyone! After trying to do the filament hack on my mini w+, I finally made it work! Since the forum has little to no information about Da Vinci w+ printers, I decided to help.

All you need is:
1. XYZprint or XYZware that works without any errors (except for the filament empty error)
2. A couple of NTAG213 tags
3. A couple of apps (My phone is on Android 10 by the way)
3.1. LINK TO APP APK FILES --> https://drive.google.com/drive/folders/ … sp=sharing
4. A whole lot of patience.

STEP ONE
- Download all the apps
- Obtain NTAG213
- Download or open your desired XYZ 3D program (XYZprinting or Xyzware)

STEP TWO
- Open NFCXYZ app
- Scan the NTAG213 with the app
- Edit the info however you like

STEP THREE
- Open NFC Refill Tool
- Scan the NTAG213 with the app
- Edit the info however you like
- Press "Generate TAG"

STEP FOUR
- Google how to disable internet access to a program (I have McAfee so I disabled from there)
- Disable internet access to XYZware or XYZprinting
- Open XYZware or XYZprinting
- Decline everuything, even updates (if there are any updates)

STEP FIVE
- Connect printer to the PC
- Choose the printer
- Import .stl file or any other file that works
- Slice the object according to the NTAG213 info you wrote with the usage of apps (ex: choose PLA if wrote PLA with the app)

STEP SIX
- Take out the original chip and place the tag neatly
OR
- Tape the tag to the bottom of the filament holder (dunno if that works, but the tag must be in contact wit the bottom)
- Ckeck the XYZware or XYZprinting screen for filament updates

STEP SEVEN
- Cross your fingers and print

This is all that I've done to make mine work. I'm still a beginner at such things but feel free to ask anything.