I know I'm late to the game. So....long story short. I need to scan a couple objects. I knew my dad bought a kit he never used in 2015. I got it and pondered 3d printing all the parts but started reading the forum a bit. I knew that someone asked for the files but was denied. I was looking at documentation and noticed the parts on the enclosure kit looked like drawings. So I imported the PDF page and since I knew some dimensions of the parts I spent about 30 minutes resizing the pieces. I cut it out using 5mm plywood and it actually fit together without any modifications. I did 3d print the laser holders and the coupler. But I got it all done today and didn't have to wait hours and hours 3d printing and putting together parts. Here is the link to download:https://www.thingiverse.com/thing:4828486
I did need a longer ribbon cable to the camera which I had. I had to use mostly different hardware than what was in the original kit. I spray painted all the pieces black.
I hope to get it working before trying any modifications to the lasers or camera.
Hope this may help someone.
]]>