I've had a good search and not been able to find a definitive answer but has anyone had any luck making filament from glass filled nylon 6/6 pellets such as Ultramid A3HG5 which is a 25% glass filled Nylon 6/6 pellet I can obtain very cheaply locally. (~£4 kg)I've read nylon 6/6 is tricky to process through the filastruder but was wondering if the added glass made it easier or harder?
The filament will be used on a 1mm volcano nozzle so blockages at the printer end aren't too much of a concern.
]]>