<![CDATA[SoliForum - 3D Printing Community — Problems getting things right]]> 2020-12-23T20:13:40Z PunBB https://www.soliforum.com/topic/18772/problems-getting-things-right/ <![CDATA[Re: Problems getting things right]]> Stefan from CNC Kitchen recycled his PLA at 175 and drilled his nozzle to 2.1mm.

]]> https://www.soliforum.com/user/25445/ 2020-12-23T20:13:40Z https://www.soliforum.com/post/154306/#p154306 <![CDATA[Re: Problems getting things right]]> PLA is one of the more challenging plastics, and recycled PLA especially so. Even mores if you don't know the specific type of PLA you're processing.

But in general:
150C is too cool
Too thin is fixed by drilling out the nozzle or adding more cooling
Brittle means that it isn't properly dried - that's the effects of moisture in the polymer

]]> https://www.soliforum.com/user/221/ 2020-10-29T15:39:24Z https://www.soliforum.com/post/154157/#p154157 <![CDATA[Problems getting things right]]> Anyone have any help they can lend? Trying to get a bead on the settings for recycling PLA. I can’t seem to get it to where it needs to be. Trying to extrude at around 150c and nothing comes out, and when I raise the temp to around 165c it’s too thin, and very brittle.
Any suggestions please?

]]> https://www.soliforum.com/user/23948/ 2020-10-29T13:35:33Z https://www.soliforum.com/post/154156/#p154156