<![CDATA[SoliForum - 3D Printing Community — the thermistor does not heat HEEEEELP!!! :(]]>2020-07-12T00:36:39ZPunBBhttps://www.soliforum.com/topic/18694/the-thermistor-does-not-heat-heeeeelp/<![CDATA[Re: the thermistor does not heat HEEEEELP!!! :(]]>it worked for me thank you very much]]>https://www.soliforum.com/user/24799/2020-07-12T00:36:39Zhttps://www.soliforum.com/post/153759/#p153759<![CDATA[Re: the thermistor does not heat HEEEEELP!!! :(]]>Yes, the pin 8/9 jumper is needed.
Your kit is not working because you have connected the thermocouple incorrectly, leading the PID controller to think the temperature is negative.
]]>https://www.soliforum.com/user/221/2020-07-11T20:52:49Zhttps://www.soliforum.com/post/153756/#p153756<![CDATA[Re: the thermistor does not heat HEEEEELP!!! :(]]>in another forum someone indicated that a bridge had to be made between pin 8 and 9 but it still didn't work]]>https://www.soliforum.com/user/24799/2020-07-10T23:23:38Zhttps://www.soliforum.com/post/153753/#p153753<![CDATA[Re: the thermistor does not heat HEEEEELP!!! :(]]>Why is there a connection to pin 8 on the PID while the diagram does not show one.?]]>https://www.soliforum.com/user/7731/2020-07-10T21:17:44Zhttps://www.soliforum.com/post/153751/#p153751<![CDATA[the thermistor does not heat HEEEEELP!!! :(]]>yesterday I assembled my filastruder I read the manual and saw some videos and I would assemble it well I would say. the problem is that when turning on the machine it does not heat and I do not think there is a button to start the temperature. check the manual and everything is fine. the wiring is also correct followed the steps to the letter. and I don't know why it doesn't heat up. and I can't think of anything anymore. please appreciate your help
