cgrillo wrote:

FD wrote:

Hi, where do I can find NTAG Tool v1.40 or newer for download?

After flashing the bootloader to Arduino Nano, do we need to flash the blank papertags first with "Update NTAG213" (Step 4+5) or can we use "NTAG Tool" directly (Step 9,10,11)?

Both tools described above are meant to be standalone tools and were created by 2 different people independently.
You should not need to use both.

The instructions say you need both and have to repeat steps 4 and 5 for every paper tag to generate a unique code for each...

This guide was written by one person who struggled with Windows and getting the Arduino's loaded in the first place.
Try it for yourself - don't believe all you read

FD wrote:

Hi, where do I can find NTAG Tool v1.40 or newer for download?

After flashing the bootloader to Arduino Nano, do we need to flash the blank papertags first with "Update NTAG213" (Step 4+5) or can we use "NTAG Tool" directly (Step 9,10,11)?

Both tools described above are meant to be standalone tools and were created by 2 different people independently.
You should not need to use both.

The instructions say you need both and have to repeat steps 4 and 5 for every paper tag to generate a unique code for each...

Hi, where do I can find NTAG Tool v1.40 or newer for download?

After flashing the bootloader to Arduino Nano, do we need to flash the blank papertags first with "Update NTAG213" (Step 4+5) or can we use "NTAG Tool" directly (Step 9,10,11)?

Both tools described above are meant to be standalone tools and were created by 2 different people independently.
You should not need to use both.

After flashing the bootloader to Arduino Nano, do we need to flash the blank papertags first with "Update NTAG213" (Step 4+5) or can we use "NTAG Tool" directly (Step 9,10,11)?

Jeander2448 wrote:

Also looking for the HEX file but the link you posted most recently is dead. any help?

The link is active again

The link is down again, is there another place to download it?

Also looking for the HEX file but the link you posted most recently is dead. any help?

The link is active again

I can't find the HEX file to upload to the arduino with xloader.
does anyone have a link to that?

thanks.

I messaged cgrillo and he sent this: http://grillo.co.uk/arduino/Update%20NTAG213-Nano.zip

thanks.

If the URL in the First Thread are not correct, we need to ask the modfreakz for a new one but the one you give is probably correct! cxgrillo modify the App

About the 522 I can't answer! As written on https://www.instructables.com/RC522-and … ID-Basics/ you need to cut a wire Wire of the 522chip to compatible. Is not worth for testing! On ebay you get a complete kit for about € 4 (U$ 4.50)

I did the testing starting with the original parts of Arduino & PN532 NFC Reader, till it sort out that the Programmer did his work with Non-Original Parts. (Now I have both parts :-(
The Time I lost was so frustrated that I had to write this small guido, for all users of the XYZ printer. In the meantime I stopped printing with the XYZ and switch complete to Resin-Printing, which gives exactly the products I need!

Regards
Gérard

1. in your step 2 you say to: "Select the correct .hex file and "upload"" when you say this what hex file are you talking about? The link to the Update NTAG213 no longer works but i was able to find a github for it here: https://github.com/cxgrillo/UpdateNTAG213 is the hex file part of the dead link?

2. I have the rc522 module for my arduino nano (it's a clone) can I use that for this guide or do I have to get the PN532? I do not have an android phone.

Also I don't know if it matters but I downloaded Xloader from here: https://github.com/binaryupdates/xLoader