Their are many ways to get to Rome!

This thread started in 2016, as the software was not so sophisticated to read/write the Tags. In the mean time their are a lot of firmware changes!

I got my Arduino & PN532 working after weeks, because many info where not 100% accurate. So for me, my Arduino Nano & PN532 works with;
1) Update NTAG213.exe (from cgrillo). Was difficult and I tried it on Original & Clone Arduino's. Installing the .hex with Xloader.exe and the Devicename: Uno(ATmega328).
(Choosing The Nano(ATmega328) as device doesn't load the .hex for me :-( I have 100% no UNO ?!?
2) NTAG Edit Tool 1.40 (from Modfreakz). Works from Scratch

So now I have the equipment to edit my TAGS, but I thought I would be easier to edit the Tags with one of this software. Is their someone who could describe to exact procedure to create a working TAG for my "da Vinci mini". A kind of QuickGuide for Dummies ;-)
I read all these 750 posts in this thread and dozen in other post but I can't find the way to Rome :-(

Some people tell you can generate a TAG easy by clicking the button, other told you need a password to generate a Pack. But because of the evolution of the Software/Firmware I have still no idea what is running properly with the actual Firmware of the Summer of 2020

Also I have no idea I need to block the connection from XYZPrint to talk home? Maybe it was in the past so, but is it stlll actual. With my Original Reel & TAG I often prints a figure without do an login at the homepage of xyzprinting.com

So what are the ways to work in 2020?

Maybe someone could write 2 short QuickGuides, 1 for Update NTAG213.exe and 1 for NTAG Edit Tool 1.40 ?

p.s. I found also a Version EEPROM Edit Tool 1.45 ?!? Is this Tool a Editor for both the Tags of the Mini & the Eeprom of the larger XYZ 3D Printers. For me it does the same as the NTAG Edit Tool 1.40 when editing my Paperchips or Original TAGS
http://www.soliforum.com/topic/18368/ee … ioproplus/