SoliForum - 3D Printing Community — Da Vinci Mini / Firmware

Re: Da Vinci Mini / Firmware

2020-06-13T22:49:28Z

Take care off downgrading!

The Tags (also original) which works, will not work anymore after downgrading! If you have no tools to reprogram the Tags, take care. I lost my 3D printer!. None of the tools I have allowing reseting the Tags (even with Arduino Nano & PN532, only errors on Windows 7)

Re: Da Vinci Mini / Firmware

2020-06-13T17:30:45Z

Hi,

Thank you very much, then I would rather leave my old firmware on it ...

Re: Da Vinci Mini / Firmware

2020-06-04T09:36:19Z

Hello

I made the same mistake! I wouldn't suggest to update to 1.3.9. I was on 1.3.3 and since I have the latest version is installed, every second print has an error 0061. So leave it as it is.

Maybe you can install with the tools in this forum a version between 1.17 and 1.3.3, but never switch to 1.3.9

Gérard

Re: Da Vinci Mini / Firmware

2020-06-03T07:34:46Z

Yes, it's working.

But the Firmware is very very old.

I think many Bugs were in it.

A new one, better performance, more combatibily...

Isn't this right ?

Re: Da Vinci Mini / Firmware

2020-06-02T19:05:27Z

If your machine is working, why do you need to update? Never update unless you have to or need a feature in an update.

Da Vinci Mini / Firmware

2020-06-02T18:50:31Z

Hi,

My new Da Vinci mini has the Firmware 1.1.7.
I use ntag213 to print with 3rd Filaments.

Can I update to Firmware 1.3.9 and use farther my ntag213 without Problems?

Thanks a lot.

(Sorry for my bad English)