<![CDATA[SoliForum - 3D Printing Community — Da Vinci JR -> RAMPS 14]]> 2020-04-14T09:44:58Z PunBB https://www.soliforum.com/topic/18525/da-vinci-jr-ramps-14/ <![CDATA[Re: Da Vinci JR -> RAMPS 14]]> I checked my connexions and all is ok.
I have the same vref in my configuration.h
I upload this video with my problem :
And this is my configuration.h

https://www.dropbox.com/s/k3xjwirgkdwx6 … ion.h?dl=0

]]> https://www.soliforum.com/user/21549/ 2020-04-14T09:44:58Z https://www.soliforum.com/post/153001/#p153001 <![CDATA[Re: Da Vinci JR -> RAMPS 14]]> Motor phases are wired wrong. They are marked on the output ports of the board. Make sure they match on the motor
Your vref could also be low for those motors. If you have an axis that works then wire all axis like that one and set the vref for all to the same as the working axis.

]]> https://www.soliforum.com/user/7731/ 2020-04-13T16:42:35Z https://www.soliforum.com/post/152994/#p152994 <![CDATA[Da Vinci JR -> RAMPS 14]]> Hi,
Before anything else i'm sorry for my english because i'm a french student and for my personnal issues i'm converting my DA VINCI JR 1.0 printer to RAMPS.
After many times i didn't solve my problems;
When i'm trying to move the Z stepper motor or the X stepper motor, there are "shaking", anything move and it's causing a lot of noise.
For the moment, i reached the forum for a solution and i didn't find it...
Could you help me ? Thank's smile

I'm using Marlin V1.1.5

]]> https://www.soliforum.com/user/21549/ 2020-04-12T19:19:30Z https://www.soliforum.com/post/152985/#p152985