<![CDATA[SoliForum - 3D Printing Community — 1.0a Nozzle heater]]>2020-04-30T03:11:01ZPunBBhttps://www.soliforum.com/topic/18520/10a-nozzle-heater/<![CDATA[Re: 1.0a Nozzle heater]]>thanks for the reply and tip. I'll check out other heaters. Pete]]>https://www.soliforum.com/user/12565/2020-04-30T03:11:01Zhttps://www.soliforum.com/post/153146/#p153146<![CDATA[Re: 1.0a Nozzle heater]]>The stock heater is 12V 35 Watts; I run an Amazon purchased China produced one and have sustained 260 Celsius on a V6 clone with a silicone sock.
One trick I do with my hotend is to coat the heater with a thin coating of Arctic Silver 5 or Grizzly Kryonaut thermal compound for the most efficient heat transfer before inserting into the heater block.
]]>https://www.soliforum.com/user/24250/2020-04-30T00:50:59Zhttps://www.soliforum.com/post/153144/#p153144<![CDATA[1.0a Nozzle heater]]>On my Da Vinci 1.0a the nozzle heater died so I replaced it with a generic 1 from my prussa knockoff but it seems not to get to temp sometimes when printing ABS. Is their nozzle heater different to the rest? Any tips re replacement? Pete]]>https://www.soliforum.com/user/12565/2020-04-10T03:37:22Zhttps://www.soliforum.com/post/152963/#p152963